YOKOGAWA DLM2000 Series User Manual

5-173
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
:SERialbus<x>:FLEXray:SEARch:SETup[:
IDData]:DATA:MODE
Function Sets or queries the data enable/disable condition,
which is one of the ID and data conditions, for
FLEXRAY bus signal searching.
Syntax
:SERialbus<x>:FLEXray:SEARch:SETup[:I
DData]:DATA:MODE {<Boolean>}
:SERialbus<x>:FLEXray:SEARch:SETup[:I
DData]:DATA:MODE?
<x> = 1 to 4
Example
:SERIALBUS1:FLEXRAY:SEARCH:SETUP:IDDA
TA:DATA:MODE ON
:SERIALBUS1:FLEXRAY:SEARCH:SETUP:IDDA
TA:DATA:MODE?
-> :SERIALBUS1:FLEXRAY:SEARCH:SETUP:I
DDATA:DATA:MODE 1
:SERialbus<x>:FLEXray:SEARch:SETup[:
IDData]:DATA:MSBLsb
Function Sets or queries the MSB and LSB bits for the
data, which is one of the ID and data conditions,
for FLEXRAY bus signal searching.
Syntax
:SERialbus<x>:FLEXray:SEARch:SETup[:I
DData]:DATA:MSBLsb {<NRf>,<NRf>}
:SERialbus<x>:FLEXray:SEARch:SETup[:I
DData]:DATA:MSBLsb?
<x> = 1 to 4
<NRf> = 0 to 63
Example
:SERIALBUS1:FLEXRAY:SEARCH:SETUP:IDDA
TA:DATA:MSBLSB 7,0
:SERIALBUS1:FLEXRAY:SEARCH:SETUP:IDDA
TA:DATA:MSBLSB?
-> :SERIALBUS1:FLEXRAY:SEARCH:SETUP:I
DDATA:DATA:MSBLSB 7,0
:SERialbus<x>:FLEXray:SEARch:SETup[:
IDData]:DATA:PATTern<y>
Function Sets or queries the data value, which is one of the
ID and data conditions, for FLEXRAY bus signal
searching in binary notation.
Syntax
:SERialbus<x>:FLEXray:SEARch:SETup[:I
DData]:DATA:PATTern<y> {<String>}
:SERialbus<x>:FLEXray:SEARch:SETup[:I
DData]:DATA:PATTern<y>?
<x> = 1 to 4
<y> = 1 to 8
<String> = Eight characters (each representing a
byte). Each character can be 0, 1, or X.
Example
:SERIALBUS1:FLEXRAY:SEARCH:SETUP:IDDA
TA:DATA:PATTERN1 "00001010"
:SERIALBUS1:FLEXRAY:SEARCH:SETUP:IDDA
TA:DATA:PATTERN1?
-> :SERIALBUS1:FLEXRAY:SEARCH:SETUP:I
DDATA:DATA:PATTERN1 "00001010"
:SERialbus<x>:FLEXray:SEARch:SETup[:
IDData]:DATA:PFORmat
Function Sets or queries the data input format, which is one
of the ID and data conditions, for FLEXRAY bus
signal searching.
Syntax
:SERialbus<x>:FLEXray:SEARch:SETup[:I
DData]:DATA:PFORmat {BINary|HEXa}
:SERialbus<x>:FLEXray:SEARch:SETup[:I
DData]:DATA:PFORmat?
<x> = 1 to 4
Example
:SERIALBUS1:FLEXRAY:SEARCH:SETUP:IDDA
TA:DATA:PFORMAT BINARY
:SERIALBUS1:FLEXRAY:SEARCH:SETUP:IDDA
TA:DATA:PFORMAT?
-> :SERIALBUS1:FLEXRAY:SEARCH:SETUP:I
DDATA:DATA:PFORMAT BINARY
:SERialbus<x>:FLEXray:SEARch:SETup[:
IDData]:DATA:SIGN
Function Sets or queries whether a signed or unsigned data
format will be used (this is one of the ID and data
conditions) for CAN bus signal searching.
Syntax
:SERialbus<x>:FLEXray:SEARch:SETup[:I
DData]:DATA:SIGN {SIGN|UNSign}
:SERialbus<x>:FLEXray:SEARch:SETup[:I
DData]:DATA:SIGN?
<x> = 1 to 4
Example
:SERIALBUS1:FLEXRAY:SEARCH:SETUP:IDDA
TA:DATA:SIGN SIGN
:SERIALBUS1:FLEXRAY:SEARCH:SETUP:IDDA
TA:DATA:SIGN?
-> :SERIALBUS1:FLEXRAY:SEARCH:SETUP:I
DDATA:DATA:SIGN SIGN
:SERialbus<x>:FLEXray:SEARch:SETup[:
IDData]:FID?
Function Queries all frame ID settings for the ID and data
conditions for FLEXRAY bus signal searching.
Syntax
:SERialbus<x>:FLEXray:SEARch:SETup[:I
DData]:FID?
<x> = 1 to 4
5.24 SERialbus Group

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English