YOKOGAWA DLM2000 Series User Manual

5-172
IM 710105-17E
:SERialbus<x>:FLEXray:SEARch:SETup[:
IDData]:DATA:BCOunt
Function Sets or queries the position for comparing
data patterns, which is one of the ID and data
conditions, for FLEXRAY bus signal searching.
Syntax
:SERialbus<x>:FLEXray:SEARch:SETup[:I
DData]:DATA:BCOunt {<NRf>}
:SERialbus<x>:FLEXray:SEARch:SETup[:I
DData]:DATA:BCOunt?
<x> = 1 to 4
<NRf> = 0 to 253
Example
:SERIALBUS1:FLEXRAY:SEARCH:SETUP:IDDA
TA:DATA:BCOUNT 1
:SERIALBUS1:FLEXRAY:SEARCH:SETUP:IDDA
TA:DATA:BCOUNT?
-> :SERIALBUS1:FLEXRAY:SEARCH:SETUP:I
DDATA:DATA:BCOUNT 1
:SERialbus<x>:FLEXray:SEARch:SETup[:
IDData]:DATA:CONDition
Function Sets or queries the comparison condition, which
is one of the ID and data conditions, for FLEXRAY
bus signal searching.
Syntax
:SERialbus<x>:FLEXray:SEARch:SETup[:I
DData]:DATA:CONDition {BETWeen|EQUal|
FALSe|GREater|LESS|NOTBetween|NOTEqul
|TRUE}
:SERialbus<x>:FLEXray:SEARch:SETup[:I
DData]:DATA:CONDition?
<x> = 1 to 4
Example
:SERIALBUS1:FLEXRAY:SEARCH:SETUP:IDDA
TA:DATA:CONDITION BETWEEN
:SERIALBUS1:FLEXRAY:SEARCH:SETUP:IDDA
TA:DATA:CONDITION?
-> :SERIALBUS1:FLEXRAY:SEARCH:SETUP:I
DDATA:DATA:CONDITION BETWEEN
:SERialbus<x>:FLEXray:SEARch:SETup[:
IDData]:DATA:DBYTe
Function Sets or queries the number of data bytes, which
is one of the ID and data conditions, for FLEXRAY
bus signal searching.
Syntax
:SERialbus<x>:FLEXray:SEARch:SETup[:I
DData]:DATA:DBYTe {<NRf>}
:SERialbus<x>:FLEXray:SEARch:SETup[:I
DData]:DATA:DBYTe?
<x> = 1 to 4
<NRf> = 1 to 8
Example
:SERIALBUS1:FLEXRAY:SEARCH:SETUP:IDDA
TA:DATA:DBYTE 1
:SERIALBUS1:FLEXRAY:SEARCH:SETUP:IDDA
TA:DATA:DBYTE?
-> :SERIALBUS1:FLEXRAY:SEARCH:SETUP:I
DDATA:DATA:DBYTE 1
:SERialbus<x>:FLEXray:SEARch:SETup[:
IDData]:DATA:DECimal<y>
Function Sets or queries a reference value, which is one
of the ID and data conditions, for FLEXRAY bus
signal searching in decimal notation.
Syntax
:SERialbus<x>:FLEXray:SEARch:SETup[:I
DData]:DATA:DECimal<y> {<NRf>}
:SERialbus<x>:FLEXray:SEARch:SETup[:I
DData]:DATA:DECimal<y>?
<x> = 1 to 4
<y> = 1 or 2
<NRf> = See the DLM2000 Features Guide for
this information.
Example
:SERIALBUS1:FLEXRAY:SEARCH:SETUP:IDDA
TA:DATA:DECIMAL1 1
:SERIALBUS1:FLEXRAY:SEARCH:SETUP:IDDA
TA:DATA:DECIMAL1?
-> :SERIALBUS1:FLEXRAY:SEARCH:SETUP:I
DDATA:DATA:DECIMAL1
:SERialbus<x>:FLEXray:SEARch:SETup[:
IDData]:DATA:ENDian
Function Sets or queries the byte order of the reference
values, which is one of the ID and data conditions,
for FLEXRAY bus signal searching.
Syntax
:SERialbus<x>:FLEXray:SEARch:SETup[:I
DData]:DATA:ENDian {BIG|LITTle}
:SERialbus<x>:FLEXray:SEARch:SETup[:I
DData]:DATA:ENDian?
<x> = 1 to 4
Example
:SERIALBUS1:FLEXRAY:SEARCH:SETUP:IDDA
TA:DATA:ENDIAN BIG
:SERIALBUS1:FLEXRAY:SEARCH:SETUP:IDDA
TA:DATA:ENDIAN?
-> :SERIALBUS1:FLEXRAY:SEARCH:SETUP:I
DDATA:DATA:ENDIAN BIG
:SERialbus<x>:FLEXray:SEARch:SETup[:
IDData]:DATA:HEXa<y>
Function Sets a reference value, which is one of the ID
and data conditions, for FLEXRAY bus signal
searching in hexadecimal notation.
Syntax
:SERialbus<x>:FLEXray:SEARch:SETup[:I
DData]:DATA:HEXa<y> {<String>}
<x> = 1 to 4
<y> = 1 to 8
<String> = Two characters (each representing a
byte). Each character can be X or a hexadecimal
value from 0 to F.
Example
:SERIALBUS1:FLEXRAY:SEARCH:SETUP:IDDA
TA:DATA:HEXA1 "1F"
5.24 SERialbus Group

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English