YOKOGAWA DLM2000 Series User Manual

5-183
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
:SERialbus<x>:LIN:SEARch:SELect
Function Sets which detected point to display in the LIN bus
signal search zoom window and queries the zoom
position of the detected point.
Syntax
:SERialbus<x>:LIN:SEARch:SELect {<NRf
>|MAXimum}
:SERialbus<x>:LIN:SEARch:SELect?
<x> = 1 to 4
<NRf> = 0 to 49999
Example
:SERIALBUS1:LIN:SEARCH:SELECT 1
:SERIALBUS1:LIN:SEARCH:SELECT?
-> :SERIALBUS1:LIN:SEARCH:SELECT 1.50
0E+00
Description If there are no detected points, the DLM2000
returns “NAN.”
:SERialbus<x>:LIN:SEARch:SELect?
MAXimum
Function Queries the number of detected points in the LIN
bus signal search.
Syntax
:SERialbus<x>:LIN:SEARch:SELe
ct? {MAXimum}
<x> = 1 to 4
Example
:SERIALBUS1:LIN:SEARCH:SELECT? MAXIMU
M
-> :SERIALBUS1:LIN:SEARCH:SELECT 100
Description If there are no detected points, the DLM2000
returns “NAN.”
:SERialbus<x>:LIN:SEARch:SETup?
Function Queries all LIN bus signal search condition
settings.
Syntax
:SERialbus<x>:LIN:SEARch:SETup?
<x> = 1 to 4
:SERialbus<x>:LIN:SEARch:SETup:ERR
or?
Function Queries all LIN bus signal search error settings.
Syntax
:SERialbus<x>:LIN:SEARch:SETup:ERRor?
<x> = 1 to 4
:SERialbus<x>:LIN:SEARch:SETup:ERRor
:CHECksum
Function Sets or queries the LIN bus signal search
checksum error setting.
Syntax
:SERialbus<x>:LIN:SEARch:SETup:ERRor:
CHECksum {<Boolean>}
:SERialbus<x>:LIN:SEARch:SETup:ERRor:
CHECksum?
<x> = 1 to 4
Example
:SERIALBUS1:LIN:SEARCH:SETUP:ERROR:CH
ECKSUM ON
:SERIALBUS1:LIN:SEARCH:SETUP:ERROR:CH
ECKSUM?
-> :SERIALBUS1:LIN:SEARCH:SETUP:ERROR
:CHECKSUM 1
:SERialbus<x>:LIN:SEARch:EXECute
Function Executes a LIN bus signal search.
Syntax
:SERialbus<x>:LIN:SEARch:EXECute
<x> = 1 to 4
Example
:SERIALBUS1:LIN:SEARCH:EXECUTE
:SERialbus<x>:LIN:SEARch:FJUMp:BREak
Function Jumps to the break field in the LIN bus signal
search result.
Syntax
:SERialbus<x>:LIN:SEARch:FJUMp:BREak
<x> = 1 to 4
Example
:SERIALBUS1:LIN:SEARCH:FJUMP:BREAK
:SERialbus<x>:LIN:SEARch:FJUMp:CSUM
Function Jumps to the checksum field in the LIN bus signal
search result.
Syntax
:SERialbus<x>:LIN:SEARch:FJUMp:CSUM
<x> = 1 to 4
Example
:SERIALBUS1:LIN:SEARCH:FJUMP:CSUM
:SERialbus<x>:LIN:SEARch:FJUMp:DATA
Function Jumps to the data field in the LIN bus signal
search result.
Syntax
:SERialbus<x>:LIN:SEARch:FJUMp:DATA
<x> = 1 to 4
Example
:SERIALBUS1:LIN:SEARCH:FJUMP:DATA
:SERialbus<x>:LIN:SEARch:FJUMp:IDENt
ifier
Function Jumps to the identifier field in the LIN bus signal
search result.
Syntax
:SERialbus<x>:LIN:SEARch:FJUMp:IDENti
fier
<x> = 1 to 4
Example
:SERIALBUS1:LIN:SEARCH:FJUMP:IDENTIFI
ER
:SERialbus<x>:LIN:SEARch:FJUMp:SYNCh
Function Jumps to the sync field in the LIN bus signal
search result.
Syntax
:SERialbus<x>:LIN:SEARch:FJUMp:SYNCh
<x> = 1 to 4
Example
:SERIALBUS1:LIN:SEARCH:FJUMP:SYNCH
5.24 SERialbus Group

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English