YOKOGAWA DLM2000 Series - Page 219

5-186
IM 710105-17E
:SERialbus<x>:LIN:SEARch:SETup:IDDat
a:DATA:PATTern<y>
Function Sets or queries the data value for LIN bus signal
searching in binary notation.
Syntax
:SERialbus<x>:LIN:SEARch:SETup:IDData
:DATA:PATTern<y> {<String>}
:SERialbus<x>:LIN:SEARch:SETup:IDData
:DATA:PATTern<y>?
<x> = 1 to 4
Example
:SERIALBUS1:LIN:SEARCH:SETUP:IDDATA:D
ATA:PATTERN1 "00110101"
:SERIALBUS1:LIN:SEARCH:SETUP:IDDATA:D
ATA:PATTERN1?
-> :SERIALBUS1:LIN:SEARCH:SETUP:IDDAT
A:DATA:PATTERN1 "00110101"
:SERialbus<x>:LIN:SEARch:SETup:IDDat
a:DATA:PFORmat
Function Sets or queries the input format, which is one of
the data conditions, for LIN bus signal searching.
Syntax
:SERialbus<x>:LIN:SEARch:SETup:
IDData:DATA:PFORmat {BINary|HEXa}
:SERialbus<x>:LIN:SEARch:SETup:
IDData:DATA:PFORmat?
<x> = 1 to 4
Example
:SERIALBUS1:LIN:SEARCH:SETUP:IDDATA:D
ATA:PFORMAT BINARY
:SERIALBUS1:LIN:SEARCH:SETUP:IDDATA:D
ATA:PFORMAT?
-> :SERIALBUS1:LIN:SEARCH:SETUP:IDDAT
A:DATA:PFORMAT BINARY
:SERialbus<x>:LIN:SEARch:SETup:IDDat
a:DATA:SIGN
Function Sets or queries whether signed or unsigned data
format will be used, which is one of the data
conditions, for LIN bus signal searching.
Syntax
:SERialbus<x>:LIN:SEARch:SETup:
IDData:DATA:SIGN {SIGN|UNSign}
:SERialbus<x>:LIN:SEARch:SETup:
IDData:DATA:SIGN?
<x> = 1 to 4
Example
:SERIALBUS1:LIN:SEARCH:SETUP:IDDATA:D
ATA:SIGN SIGN
:SERIALBUS1:LIN:SEARCH:SETUP:IDDATA:D
ATA:SIGN?
-> :SERIALBUS1:LIN:SEARCH:SETUP:IDDAT
A:DATA:SIGN SIGN
:SERialbus<x>:LIN:SEARch:SETup:IDDat
a:IDENtifier?
Function Queries all identifier settings for the ID and data
conditions for LIN bus signal searching.
Syntax
:SERialbus<x>:LIN:SEARch:SETup:IDData
:IDENtifier?
<x> = 1 to 4
:SERialbus<x>:LIN:SEARch:SETup:IDDat
a:IDENtifier:ID?
Function Queries all LIN bus signal search ID settings.
Syntax
:SERialbus<x>:LIN:SEARch:SETup:IDData
:IDENtifier:ID?
<x> = 1 to 4
:SERialbus<x>:LIN:SEARch:SETup:IDDat
a:IDENtifier:ID:HEXa
Function Sets the ID for LIN bus signal searching in
hexadecimal notation.
Syntax
:SERialbus<x>:LIN:SEARch:SETup:IDData
:IDENtifier:ID:HEXa {<String>}
<x> = 1 to 4
Example
:SERIALBUS1:LIN:SEARCH:SETUP:IDDATA:I
DENTIFIER:ID:HEXA "1E"
:SERialbus<x>:LIN:SEARch:SETup:IDDat
a:IDENtifier:ID:MODE
Function Sets or queries the ID enable/disable condition for
LIN bus signal searching.
Syntax
:SERialbus<x>:LIN:SEARch:SETup:
IDData:IDENtifier:ID:MODE {<Boolean>}
:SERialbus<x>:LIN:SEARch:SETup:
IDData:IDENtifier:ID:MODE?
<x> = 1 to 4
Example
:SERIALBUS1:LIN:SEARCH:SETUP:IDDATA:I
DENTIFIER:ID:MODE ON
:SERIALBUS1:LIN:SEARCH:SETUP:IDDATA:I
DENTIFIER:ID:MODE?
-> :SERIALBUS1:LIN:SEARCH:SETUP:IDDAT
A:IDENTIFIER:ID:MODE 1
:SERialbus<x>:LIN:SEARch:SETup:IDDat
a:IDENtifier:ID:PATTern
Function Sets or queries the ID value for LIN bus signal
searching in binary notation.
Syntax
:SERialbus<x>:LIN:SEARch:SETup:IDDat
a:IDENtifier:ID:PATTern {<String>}
:SERialbus<x>:LIN:SEARch:SETup:IDDat
a:IDENtifier:ID:PATTern?
<x> = 1 to 4
Example
:SERIALBUS1:LIN:SEARCH:SETUP:IDDATA:I
DENTIFIER:ID:PATTERN "101100"
:SERIALBUS1:LIN:SEARCH:SETUP:IDDATA:I
DENTIFIER:ID:PATTERN?
-> :SERIALBUS1:LIN:SEARCH:SETUP:IDDAT
A:IDENTIFIER:ID:PATTERN "101100"
5.24 SERialbus Group