YOKOGAWA DLM2000 Series User Manual

5-187
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
:SERialbus<x>:LIN:SEARch:SETup:IDDat
a:IDENtifier:PFORmat
Function Sets or queries the ID input format for LIN bus
signal searching.
Syntax
:SERialbus<x>:LIN:SEARch:SETup:
IDData:IDENtifier:PFORmat {BINary|HEX
a}
:SERialbus<x>:LIN:SEARch:SETup:
IDData:IDENtifier:PFORmat?
<x> = 1 to 4
Example
:SERIALBUS1:LIN:SEARCH:SETUP:IDDATA:I
DENTIFIER:PFORMAT BINARY
:SERIALBUS1:LIN:SEARCH:SETUP:IDDATA:I
DENTIFIER:PFORMAT?
-> :SERIALBUS1:LIN:SEARCH:SETUP:IDDAT
A:IDENTIFIER:PFORMAT BINARY
:SERialbus<x>:LIN:SEARch:SETup:MODE
Function Sets or queries the LIN bus signal search mode
setting.
Syntax
:SERialbus<x>:LIN:SEARch:SETup:MO
DE {BSYNch|ERRor|IDData}
:SERialbus<x>:LIN:SEARch:SETup:MODE?
<x> = 1 to 4
Example
:SERIALBUS1:LIN:SEARCH:SETUP:MODE BSY
NCH
:SERIALBUS1:LIN:SEARCH:SETUP:MODE?
-> :SERIALBUS1:LIN:SEARCH:SETUP:
MODE BSYNCH
:SERialbus<x>:PSI5?
Function Queries all PSI5 signal analysis and search
settings.
Syntax
:SERialbus<x>:PSI5?
<x> = 1 to 4
:SERialbus<x>:PSI5:ANALyze?
Function Queries all PSI5 signal analysis settings.
Syntax
:SERialbus<x>:PSI5:ANALyze?
<x> = 1 to 4
:SERialbus<x>:PSI5[:ANALyze]:SETup?
Function Queries all bus setup settings for PSI5 signal
analysis.
Syntax
:SERialbus<x>:PSI5[:ANALyze]:SETup?
<x> = 1 to 4
:SERialbus<x>:PSI5[:ANALyze]:SETup:D
ATA?
Function Queries all PSI5 signal analysis data signal
settings.
Syntax
:SERialbus<x>:PSI5[:ANALyze]:SETup:DA
TA?
<x> = 1 to 4
:SERialbus<x>:PSI5[:ANALyze]:SETup:D
ATA:BRATe
Function Sets or queries the PSI5 signal analysis bit rate
(data transfer rate).
Syntax
:SERialbus<x>:PSI5[:ANALyze]:SETup:DA
TA:BRATe {<NRf>|USER,<NRf>}
:SERialbus<x>:PSI5[:ANALyze]:SETup:DA
TA:BRATe?
<x> = 1 to 4
<NRf> = 125000, 189000
USER <NRf> = See the DLM2000 Features Guide
for this information.
Example
:SERIALBUS1:PSI5:ANALYZE:SETUP:DATA:B
RATE 125000
:SERIALBUS1:PSI5:ANALYZE:SETUP:DATA:B
RATE?
-> :SERIALBUS1:PSI5:ANALYZE:SETUP:DAT
A:BRATE 125000
:SERialbus<x>:PSI5[:ANALyze]:SETup:D
ATA:CTOLerance
Function Sets or queries the PSI5 signal analysis clock
tolerance.
Syntax
:SERialbus<x>:PSI5[:ANALyze]:SETup:DA
TA:CTOLerance {<NRf>}
:SERialbus<x>:PSI5[:ANALyze]:SETup:DA
TA:CTOLerance?
<NRf> = ±0.5% to ±33.3% (resolution:0.1%)
<x> = 1 to 4
Example
:SERIALBUS1:PSI5:ANALYZE:SETUP:DATA:C
TOLERANCE 5
:SERIALBUS1:PSI5:ANALYZE:SETUP:DATA:C
TOLERANCE?
-> :SERIALBUS1:PSI5:ANALYZE:SETUP:DAT
A:CTOLERANCE 5.00E+00
:SERialbus<x>:PSI5[:ANALyze]:SETup:D
ATA:DBITs
Function Sets or queries the data length for PSI5 signal
analysis.
Syntax
:SERialbus<x>:PSI5[:ANALyze]:SETup:DA
TA:DBITs {<NRf>}
:SERialbus<x>:PSI5[:ANALyze]:SETup:DA
TA:DBITs?
<x> = 1 to 4
<NRf> = 10, 16
Example
:SERIALBUS1:PSI5:ANALYZE:SETUP:DATA:D
BITS 10
:SERIALBUS1:PSI5:ANALYZE:SETUP:DATA:D
BITS?
-> :SERIALBUS1:PSI5:ANALYZE:SETUP:DAT
A:DBITS 10
5.24 SERialbus Group

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English