YOKOGAWA DLM2000 Series - Page 231

5-198
IM 710105-17E
:SERialbus<x>:SENT:DETail:LIST:VAL
ue?
Function Queries all the data for the specified analysis
number in the SENT signal analysis result list.
Syntax
:SERialbus<x>:SENT:DETail:LIST:VAL
ue? {<NRf>|MAXimum|MINimum}
<x> = 1 to 4
<NRf> = –100000 to 100000
Example
:SERIALBUS1:SENT:DETail:LIST:VALUE? 0
-> :SERIALBUS1:SENT:DETAIL:LIST:VAL
UE "0,-0.1672,168.00,3.00,1100,6,3,
5,E,B,9,3,283.73,,,"
Description The items displayed in the analysis result list
varies depending on the :SERialbus<x>:SENT[:
ANALyze]:SETup:DISPlay {BOTH|FAST|SLOW}
setting.
:SERialbus<x>:SENT:SEARch?
Function Queries all SENT signal search settings.
Syntax
:SERialbus<x>:SENT:SEARch?
<x> = 1 to 4
:SERialbus<x>:SENT:SEARch:ABORt
Function Aborts the SENT signal search.
Syntax
:SERialbus<x>:SENT:SEARch:ABORt
<x> = 1 to 4
Example
:SERIALBUS1:SENT:SEARCH:ABORT
:SERialbus<x>:SENT:SEARch:EXECute
Function Executes a SENT signal search.
Syntax
:SERialbus<x>:SENT:SEARch:EXECute
<x> = 1 to 4
Example
:SERIALBUS1:SENT:SEARCH:EXECUTE
:SERialbus<x>:SENT:SEARch:SELect
Function Sets which detected point to display in the SENT
signal search zoom window and queries the zoom
position of the detected point.
Syntax
:SERialbus<x>:SENT:SEARch:SELe
ct {<NRf>|MAXimum}
:SERialbus<x>:SENT:SEARch:SELect?
<x> = 1 to 4
<NRf> = 0 to 49999
Example
:SERIALBUS1:SENT:SEARCH:SELECT 1
:SERIALBUS1:SENT:SEARCH:SELECT?
-> :SERIALBUS1:SENT:SEARCH:SELECT 1.5
00E+00
Description If there are no detected points, the DLM2000
returns “NAN.”
:SERialbus<x>:SENT:SEARch:SELe
ct? MAXimum
Function Queries the number of detected points in the
SENT signal search.
Syntax
:SERialbus<x>:SENT:SEARch:SELe
ct? {MAXimum}
<x> = 1 to 4
Example
:SERIALBUS1:SENT:SEARCH:SELECT? MAXim
um
-> :SERIALBUS1:SENT:SEARCH:SELECT 100
Description If there are no detected points, the DLM2000
returns “NAN.”
:SERialbus<x>:SENT:SEARch[:SETup]?
Function Queries all SENT signal search condition settings.
Syntax
:SERialbus<x>:SENT:SEARch[:SETup]?
<x> = 1 to 4
:SERialbus<x>:SENT:SEARch[:SETup]:ER
Ror?
Function Queries all SENT signal search error settings.
Syntax
:SERialbus<x>:SENT:SEARch:[SETup]:ERR
or?
<x> = 1 to 4
:SERialbus<x>:SENT:SEARch:[SETup]:ER
Ror:FCRC
Function Sets or queries the SENT signal search fast
channel CRC error.
Syntax
:SERialbus<x>:SENT:SEARch:[SETup]:ERR
or:FCRC {<Boolean>}
:SERialbus<x>:SENT:SEARch:[SETup]:ERR
or:FCRC?
<x> = 1 to 4
Example
:SERIALBUS1:SENT:SEARCH:SETUP:ERROR:F
CRC ON
:SERIALBUS1:SENT:SEARCH:SETUP:ERROR:F
CRC?
-> :SERIALBUS1:SENT:SEARCH:SETUP:ERRO
R:FCRC 1
5.24 SERialbus Group