YOKOGAWA DLM2000 Series User Manual

5-197
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
:SERialbus<x>:SENT[:ANALyze]:SETup:F
ORMat:VERSion
Function Sets or queries the SENT signal analysis
specification version.
Syntax
:SERialbus<x>:SENT[:ANALyze]:SETup:FO
RMat:VERSion {FEB2008|JAN2010}
:SERialbus<x>:SENT[:ANALyze]:SETup:FO
RMat:VERESion?
<x> = 1 to 4
Example
:SERIALBUS1:SENT:ANALYZE:SETUP:FORMAT
:VERSION JAN2010
:SERIALBUS1:SENT:ANALYZE:SETUP:FORMAT
:VERSION?
-> :SERIALBUS1:SENT:ANALYZE:SETUP:FOR
MAT:VERSION JAN2010
:SERialbus<x>:SENT[:ANALyze]:SETup:S
TYPe
Function Sets or queries the SENT signal analysis slow
channel format.
Syntax
:SERialbus<x>:SENT[:ANALyze]:SETup:ST
YPe {ENHanced|SHORt}
:SERialbus<x>:SENT[:ANALyze]:SETup:ST
YPe?
<x> = 1 to 4
Example
:SERIALBUS1:SENT:ANALYZE:SETUP:STY
PE ENHANCED
:SERIALBUS1:SENT:ANALYZE:SETUP:STYPE?
-> :SERIALBUS1:SENT:ANALYZE:SETUP:STY
PE ENHANCED
:SERialbus<x>:SENT[:ANALyze]:SETup:S
OURce
Function Sets or queries the SENT signal analysis source.
Syntax
:SERialbus<x>:SENT[:ANALyze]:SETup:SO
URce {<NRf>|BIT<x>|MATH<x>}
:SERialbus<x>:SENT[:ANALyze]:SETup:SO
URce?
<x> = 1 to 4
<NRf> = 1 to 8
<x> of BIT<x> = 1 to 8
<x> of MATH<x> = 1 or 2
Example
:SERIALBUS1:SENT:ANALYZE:SETUP:SOUR
CE 1
:SERIALBUS1:SENT:ANALYZE:SETUP:SOUR
CE?
-> :SERIALBUS1:SENT:ANALYZE:SETUP:SOU
RCE 1
:SERialbus<x>:SENT:DETail?
Function Queries all SENT signal analysis list settings.
Syntax
:SERialbus<x>:SENT:DETail?
<x> = 1 to 4
:SERialbus<x>:SENT:DETail:DISPlay
Function Sets or queries the display mode for the SENT
signal analysis list.
Syntax
:SERialbus<x>:SENT:DETail:DISPlay {FU
LL|LOWer|UPPer}
:SERialbus<x>:SENT:DETail:DISPlay?
<x> = 1 to 4
Example
:SERIALBUS1:SENT:DETAIL:DISPLAY FULL
:SERIALBUS1:SENT:DETAIL:DISPLAY?
-> :SERIALBUS1:SENT:DETAIL:DISPLAY FU
LL
:SERialbus<x>:SENT:DETail:LIST:ALL?
Function Queries all the data for all analysis numbers in the
SENT signal analysis result list.
Syntax
:SERialbus<x>:SENT:DETail:LIST:ALL?
<x> = 1 to 4
Example
:SERIALBUS1:SENT:DETAIL:LIST:ALL?
-> #8
(number of bytes, 8 digits)(data sequence)
Description All the data for all analysis numbers are returned
in <block data> format.
The data of each analysis number is separated by
ASCII code 0AH.
:SERialbus<x>:SENT:DETail:LIST:ITEM?
Function Queries all items that will be displayed in the
SENT signal analysis result list.
Syntax
:SERialbus<x>:SENT:DETail:LIST:ITEM?
<x> = 1 to 4
Example
:SERIALBUS1:SENT:DETail:LIST:ITEM?
-> :SERIALBUS1:SENT:DETAIL:LIST:
ITEM "No.,Time(ms),Sync(us),Tick(us),
S&C,Data,CRC,Length(tick),Information
,SlowCH,"
Description The items displayed in the analysis result list
varies depending on the :SERialbus<x>:SENT[:
ANALyze]:SETup:DISPlay {BOTH|FAST|SLOW}
setting.
5.24 SERialbus Group

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English