YOKOGAWA DLM2000 Series User Manual

5-212
IM 710105-17E
:SERialbus<x>:SPATtern[:ANALyze]:SET
up:LATCh:SOURce
Function Sets or queries the latch signal for user-defined
bus signal analysis.
Syntax
:SERialbus<x>:SPATtern[:ANALyze]:SETu
p:LATCh:SOURce {<NRf>|NONE}
:SERialbus<x>:SPATtern[:ANALyze]:SETu
p:LATCh:SOURce?
<x> = 1 to 4 (1 only for 2-channel models)
<NRf> = 1 to 4 (NRf not available for 2-channel
models)
Example
:SERIALBUS1:SPATTERN:ANALYZE:SETUP:LA
TCH:SOURCE 1
:SERIALBUS1:SPATTERN:ANALYZE:SETUP:LA
TCH:SOURCE?
-> :SERIALBUS1:SPATTERN:ANALYZE:
SETUP:LATCH:SOURCE 1
:SERialbus<x>:SPATtern[:ANALyze]:SET
up:SPOint
Function Sets or queries the analysis start point for user-
defined bus signal analysis.
Syntax
:SERialbus<x>:SPATtern[:ANALyze]:SETu
p:SPOint {<NRf>}
:SERialbus<x>:SPATtern[:ANALyze]:SETu
p:SPOint?
<x> = 1 to 4 (1 only for 2-channel models)
 <NRf>=−5to5(divisions)
Example
:SERIALBUS1:SPATTERN:ANALYZE:SETUP:SP
OINT−5
:SERIALBUS1:SPATTERN:ANALYZE:SETUP:SP
OINT?
-> :SERIALBUS1:SPATTERN:ANALYZE:SETUP
:SPOINT−5.0000000E+00
:SERialbus<x>:SPATtern:SEARch?
Function Queries all user-defined bus signal search
settings.
Syntax
:SERialbus<x>:SPATtern:SEARch?
<x> = 1 to 4 (1 only for 2-channel models)
:SERialbus<x>:SPATtern:SEARch:ABORt
Function Aborts the user-defined bus signal search.
Syntax
:SERialbus<x>:SPATtern:SEARch:ABORt
<x> = 1 to 4 (1 only for 2-channel models)
Example
:SERIALBUS1:SPATTERN:SEARCH:ABORT
:SERialbus<x>:SPATtern:SEARch:EXECu
te
Function Executes a user-defined bus signal search.
Syntax
:SERialbus<x>:SPATtern:SEARch:EXECute
<x> = 1 to 4 (1 only for 2-channel models)
Example
:SERIALBUS1:SPATTERN:SEARCH:EXECUTE
:SERialbus<x>:SPATtern:SEARch:SELect
Function Sets which detected point to display in the user-
defined bus signal search zoom window and
queries the zoom position of the detected point.
Syntax
:SERialbus<x>:SPATtern:SEARch:SELe
ct {<NRf>|MAXimum}
:SERialbus<x>:SPATtern:SEARch:SELect?
<x> = 1 to 4 (1 only for 2-channel models)
<NRf> = 0 to 49999
Example
:SERIALBUS1:SPATTERN:SEARCH:SELECT 1
:SERIALBUS1:SPATTERN:SEARCH:SELECT?
-> :SERIALBUS1:SPATTERN:SEARCH:SELE
CT 1.500E+00
Description If there are no detected points, the DLM2000
returns “NAN.”
:SERialbus<x>:SPATtern:SEARch:SELe
ct? Maximum
Function Queries the number of detected points in the user-
defined bus signal search.
Syntax
:SERialbus<x>:SPATtern:SEARch:SELe
ct? {MAXimum}
<x> = 1 to 4 (1 only for 2-channel models)
Example
:SERIALBUS1:SPATtern:SEARCH:SELE
CT? MAXIMUM
-> :SERIALBUS1:SPATtern:SEARCH:SELE
CT 100
Description If there are no detected points, the DLM2000
returns “NAN.”
:SERialbus<x>:SPATtern:SEARch:SETup?
Function Queries all user-defined bus signal search
condition settings.
Syntax
:SERialbus<x>:SPATtern:SEARch:SETup?
<x> = 1 to 4 (1 only for 2-channel models)
:SERialbus<x>:SPATtern:SEARch:SETup:
BITSize
Function Sets or queries the bit length setting for user-
defined bus signal analysis.
Syntax
:SERialbus<x>:SPATtern:SEARch:SETup:B
ITSize {<NRf>}
:SERialbus<x>:SPATtern:SEARch:SETup:B
ITSize?
<x> = 1 to 4 (1 only for 2-channel models)
<NRf> = 1 to 128
Example
:SERIALBUS1:SPATTERN:SEARCH:SETUP:BIT
SIZE 1
:SERIALBUS1:SPATTERN:SEARCH:SETUP:BIT
SIZE?
-> :SERIALBUS1:SPATTERN:SEARCH:SETUP:
BITSIZE 1
5.24 SERialbus Group

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English