YOKOGAWA DLM2000 Series User Manual

5-220
IM 710105-17E
:SERialbus<x>:UART:SEARch:SELect
Function Sets which detected point to display in the UART
signal search zoom window and queries the zoom
position of the detected point.
Syntax
:SERialbus<x>:UART:SEARch:SELe
ct {<NRf>|MAXimum}
:SERialbus<x>:UART:SEARch:SELect?
<x> = 1 to 4
<NRf> = 0 to 49999
Example
:SERIALBUS1:UART:SEARCH:SELECT 1
:SERIALBUS1:UART:SEARCH:SELECT?
-> :SERIALBUS1:UART:SEARCH:SELECT 1.5
00E+00
Description If there are no detected points, the DLM2000
returns “NAN.”
:SERialbus<x>:UART:SEARch:SELect?
Maximum
Function Queries the number of detected points in the
UART signal search.
Syntax
:SERialbus<x>:UART:SEARch:SELe
ct? {MAXimum}
<x> = 1 to 4
Example
:SERIALBUS1:UART:SEARCH:SELECT? MAXIM
UM
-> :SERIALBUS1:UART:SEARCH:SELECT 100
Description If there are no detected points, the DLM2000
returns “NAN.”
:SERialbus<x>:UART:SEARch:SETup?
Function Queries all UART signal search condition settings.
Syntax
:SERialbus<x>:UART:SEARch:SETup?
<x> = 1 to 4
:SERialbus<x>:UART:SEARch:SETup:DA
TA?
Function Queries all UART signal search data settings.
Syntax
:SERialbus<x>:UART:SEARch:SETup:DATA?
<x> = 1 to 4
:SERialbus<x>:UART:SEARch:SETup:DATA
:ASCii
Function Sets the UART bus signal search data in ASCII
format.
Syntax
:SERialbus<x>:UART:SEARch:SETup:DATA:
ASCii {<String>}
<x> = 1 to 4
Example
:SERIALBUS1:UART:SEARCH:SETUP:DATA:AS
CII "TEST"
:SERialbus<x>:UART:SEARch:SETup:DATA
:CONDition
Function Sets or queries the data comparison condition (true
or false) for UART signal searching.
Syntax
:SERialbus<x>:UART:SEARch:SETup:DATA:
CONDition {DONTcare|TRUE}
:SERialbus<x>:UART:SEARch:SETup:DATA:
CONDition?
<x> = 1 to 4
Example
:SERIALBUS1:UART:SEARCH:SETUP:DATA:CO
NDITION DONTCARE
:SERIALBUS1:UART:SEARCH:SETUP:DATA:CO
NDITION?
-> :SERIALBUS1:UART:SEARCH:SETUP:
DATA:CONDITION DONTCARE
:SERialbus<x>:UART:SEARch:SETup:DATA
:CSENsitive
Function Sets or queries whether to distinguish uppercase
and lowercase letters in ASCII data for the UART
bus signal search.
Syntax
:SERialbus<x>:UART:SEARch:SETup:DATA:
CSENsitive {<Boolean>}
:SERialbus<x>:UART:SEARch:SETup:DATA:
CSENsitive?
<x> = 1 to 4
Example
:SERIALBUS1:UART:SEARCH:SETUP:DATA:CS
ENSITIVE ON
:SERIALBUS1:UART:SEARCH:SETUP:DATA:CS
ENSITIVE?
-> :SERIALBUS1:UART:SEARCH:SETUP:
DATA:CSENSITIVE 1
:SERialbus<x>:UART:SEARch:SETup:DATA
:DBYTe
Function Sets or queries the number of data bytes for
UART signal searching.
Syntax
:SERialbus<x>:UART:SEARch:SETup:DATA:
DBYTe {<NRf>}
:SERialbus<x>:UART:SEARch:SETup:DATA:
DBYTe?
<x> = 1 to 4
<NRf> = 1 to 4 bytes
Example
:SERIALBUS1:UART:SEARCH:SETUP:DATA:DB
YTE 1
:SERIALBUS1:UART:SEARCH:SETUP:DATA:DB
YTE?
-> :SERIALBUS1:UART:SEARCH:SETUP:
DATA:DBYTE 1
5.24 SERialbus Group

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English