YOKOGAWA DLM2000 Series User Manual

5-219
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
:SERialbus<x>:UART[:ANALyze]:SETup:P
OLarity
Function Sets or queries the polarity setting for UART signal
analysis.
Syntax
:SERialbus<x>:UART[:ANALyze]:SETup:PO
Larity {NEGative|POSitive}
:SERialbus<x>:UART[:ANALyze]:SETup:PO
Larity?
<x> = 1 to 4
Example
:SERIALBUS1:UART:ANALYZE:SETUP:POLARI
TY NEGATIVE
:SERIALBUS1:UART:ANALYZE:SETUP:POLARI
TY?
-> :SERIALBUS1:UART:ANALYZE:SETUP:POL
ARITY NEGATIVE
:SERialbus<x>:UART[:ANALyze]:SETup:S
OURce
Function Sets or queries the source signal for UART signal
analysis.
Syntax
:SERialbus<x>:UART[:ANALyze]:SETup:SO
URce {<NRf>|BIT<x>|MATH<x>}
:SERialbus<x>:UART[:ANALyze]:SETup:SO
URce?
<x> = 1 to 4
<NRf> = 1 to 4
<x> of BIT<x> = 1 to 8
<x> of MATH<x> = 1 or 2
Example
:SERIALBUS1:UART:ANALYZE:SETUP:SOUR
CE 1
:SERIALBUS1:UART:ANALYZE:SETUP:SOUR
CE?
-> :SERIALBUS1:UART:ANALYZE:SETUP:SOU
RCE 1
:SERialbus<x>:UART[:ANALyze]:SETup:S
POint
Function Sets or queries the UART signal analysis sample
point.
Syntax
:SERialbus<x>:UART[:ANALyze]:SETup:SP
Oint {<NRf>}
:SERialbus<x>:UART[:ANALyze]:SETup:SP
Oint?
<x> = 1 to 4
<NRf> = 18.8 to 90.6
Example
:SERIALBUS1:UART:ANALYZE:SETUP:SPOI
NT 18.8
:SERIALBUS1:UART:ANALYZE:SETUP:SPOI
NT?
-> :SERIALBUS1:UART:ANALYZE:SETUP:SPO
INT 18.8
:SERialbus<x>:UART:DETail?
Function Queries all UART signal analysis result list
settings.
Syntax
:SERialbus<x>:UART:DETail?
<x> = 1 to 4
:SERialbus<x>:UART:DETail:DISPlay
Function Sets or queries the display mode for the UART
signal analysis result list.
Syntax
:SERialbus<x>:UART:DETail:DISPlay {FU
LL|LOWer|UPPer}
:SERialbus<x>:UART:DETail:DISPlay?
<x> = 1 to 4
Example
:SERIALBUS1:UART:DETAIL:DISPLAY FULL
:SERIALBUS1:UART:DETAIL:DISPLAY?
-> :SERIALBUS1:UART:DETAIL:DISPLAY FU
LL
:SERialbus<x>:UART:DETail:LIST:ITEM?
Function Queries all items that will be displayed in the
UART signal analysis result list.
Syntax
:SERialbus<x>:UART:DETail:LIST:ITEM?
<x> = 1 to 4
Example
:SERIALBUS1:UART:DETAIL:LIST:ITEM?
-> :SERIALBUS1:UART:DETAIL:LIST:
ITEM "No.,Time(ms),Data(HEX),Data(ASC
II),Information"
:SERialbus<x>:UART:DETail:LIST:VAL
ue?
Function Queries all of the data for the specified analysis
number in the UART signal analysis result list.
Syntax
:SERialbus<x>:UART:DETail:LIST:VAL
ue? {<NRf>|MAXimum|MINimum}
<x> = 1 to 4
<NRf> = See the DLM2000 Features Guide for
this information.
Example
:SERIALBUS1:UART:DETAIL:LIST:VALUE? 0
-> :SERIALBUS1:UART:DETAIL:LIST:VAL
UE "0,−0.5720,3A7469D2,":ti.",,"
:SERialbus<x>:UART:SEARch?
Function Queries all UART signal search settings.
Syntax
:SERialbus<x>:UART:SEARch?
<x> = 1 to 4
:SERialbus<x>:UART:SEARch:ABORt
Function Aborts the UART signal search.
Syntax
:SERialbus<x>:UART:SEARch:ABORt
<x> = 1 to 4
Example
:SERIALBUS1:UART:SEARCH:ABORT
:SERialbus<x>:UART:SEARch:EXECute
Function Executes a UART signal search.
Syntax
:SERialbus<x>:UART:SEARch:EXECute
<x> = 1 to 4
Example
:SERIALBUS1:UART:SEARCH:EXECUTE
5.24 SERialbus Group

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English