YOKOGAWA DLM2000 Series - Page 267

5-234
IM 710105-17E
:TRIGger{[:ATRigger]|:BTRigger}:CAN:
EFRame:CRC
Function Sets or queries the CAN bus signal trigger CRC
error setting.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN:E
FRame:CRC {<Boolean>}
:TRIGger{[:ATRigger]|:BTRigger}:CAN:E
FRame:CRC?
Example
:TRIGGER:ATRIGGER:CAN:EFRAME:CRC ON
:TRIGGER:ATRIGGER:CAN:EFRAME:CRC?
-> :TRIGGER:ATRIGGER:CAN:EFRAME:CRC 1
:TRIGger{[:ATRigger]|:BTRigger}:CAN:
EFRame[:MODE]
Function Sets or queries the CAN bus signal trigger error
frame setting.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN:E
FRame[:MODE] {<Boolean>}
:TRIGger{[:ATRigger]|:BTRigger}:CAN:E
FRame[:MODE]?
Example
:TRIGGER:ATRIGGER:CAN:EFRAME:MODE ON
:TRIGGER:ATRIGGER:CAN:EFRAME:MODE?
-> :TRIGGER:ATRIGGER:CAN:EFRAME:
MODE 1
:TRIGger{[:ATRigger]|:BTRigger}:CAN:
EFRame:STUFF
Function Sets or queries the CAN bus signal trigger stuff
error setting.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN:E
FRame:STUFF {<Boolean>}
:TRIGger{[:ATRigger]|:BTRigger}:CAN:E
FRame:STUFF?
Example
:TRIGGER:ATRIGGER:CAN:EFRAME:STUFF ON
:TRIGGER:ATRIGGER:CAN:EFRAME:STUFF?
-> :TRIGGER:ATRIGGER:CAN:EFRAME:
STUFF 1
:TRIGger{[:ATRigger]|:BTRigger}:CAN[
:IDData]?
Function Queries all ID and data condition settings for CAN
bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN[:
IDData]?
:TRIGger{[:ATRigger]|:BTRigger}:CAN[
:IDData]:ACK?
Function Queries all ACK settings for the ID and data
conditions for CAN bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN[:
IDData]:ACK?
:TRIGger{[:ATRigger]|:BTRigger}:CAN[
:IDData]:ACK:MODE
Function Sets or queries the ACK mode, which is one of
the ID and data conditions, for CAN bus signal
triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN[:
IDData]:ACK:MODE {<Boolean>}
:TRIGger{[:ATRigger]|:BTRigger}:CAN[:
IDData]:ACK:MODE?
Example
:TRIGGER:ATRIGGER:CAN:IDDATA:ACK:MO
DE ON
:TRIGGER:ATRIGGER:CAN:IDDATA:ACK:MO
DE?
-> :TRIGGER:ATRIGGER:CAN:IDDATA:ACK:M
ODE 1
:TRIGger{[:ATRigger]|:BTRigger}:CAN[
:IDData]:ACK:TYPE
Function Sets or queries the ACK condition, which is one
of the ID and data conditions, for CAN bus signal
triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN[:
IDData]:ACK:TYPE {ACK|ACKBoth|NONack}
:TRIGger{[:ATRigger]|:BTRigger}:CAN[:
IDData]:ACK:TYPE?
Example
:TRIGGER:ATRIGGER:CAN:IDDATA:ACK:TY
PE ACK
:TRIGGER:ATRIGGER:CAN:IDDATA:ACK:TY
PE?
-> :TRIGGER:ATRIGGER:CAN:IDDATA:ACK:T
YPE ACK
:TRIGger{[:ATRigger]|:BTRigger}:CAN[
:IDData]:DATA?
Function Queries all data settings for the ID and data
conditions for CAN bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN[:
IDData]:DATA?
:TRIGger{[:ATRigger]|:BTRigger}:CAN[
:IDData]:DATA:CONDition
Function Sets or queries the comparison condition, which
is one of the ID and data conditions, for CAN bus
signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN[:
IDData]:DATA:CONDition {BETWeen|EQUal
|FALSe|GREater|LESS|NOTBetween|NOTEqu
l|TRUE}
:TRIGger{[:ATRigger]|:BTRigger}:CAN[:
IDData]:DATA:CONDition?
Example
:TRIGGER:ATRIGGER:CAN:IDDATA:DATA:CON
DITION BETWEEN
:TRIGGER:ATRIGGER:CAN:IDDATA:DATA:CON
DITION?
-> :TRIGGER:ATRIGGER:CAN:IDDATA:DATA:
CONDITION BETWEEN
5.33 TRIGger Group