YOKOGAWA DLM2000 Series User Manual

5-237
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
:TRIGger{[:ATRigger]|:BTRigger}:CAN[
:IDData]:IDENtifier:MFORmat
Function Sets or queries the ID frame format (standard
or extended), which is one of the ID and data
conditions, for CAN bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN[:
IDData]:IDENtifier:MFORmat {EXTended|
STANdard}
:TRIGger{[:ATRigger]|:BTRigger}:CAN[:
IDData]:IDENtifier:MFORmat?
Example
:TRIGGER:ATRIGGER:CAN:IDDATA:IDENTIFI
ER:MFORMAT EXTENDED
:TRIGGER:ATRIGGER:CAN:IDDATA:IDENTIFI
ER:MFORMAT?
-> :TRIGGER:ATRIGGER:CAN:IDDATA:IDENT
IFIER:MFORMAT EXTENDED
:TRIGger{[:ATRigger]|:BTRigger}:CAN[
:IDData]:IDENtifier:PFORmat
Function Sets or queries the ID input format, which is one
of the ID and data conditions, for CAN bus signal
triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN[:
IDData]:IDENtifier:PFORmat {BINary|HE
Xa|MESSage}
:TRIGger{[:ATRigger]|:BTRigger}:CAN[:
IDData]:IDENtifier:PFORmat?
Example
:TRIGGER:ATRIGGER:CAN:IDDATA:IDENTIFI
ER:PFORMAT BINARY
:TRIGGER:ATRIGGER:CAN:IDDATA:IDENTIFI
ER:PFORMAT?
-> :TRIGGER:ATRIGGER:CAN:IDDATA:IDENT
IFIER:PFORMAT BINARY
:TRIGger{[:ATRigger]|:BTRigger}:CAN[
:IDData]:MSIGnal?
Function Queries all message and signal settings for the ID
and data conditions for CAN bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:
CAN[:IDData]:MSIGnal?
:TRIGger{[:ATRigger]|:BTRigger}:CAN[
:IDData]:MSIGnal:MESSage:ITEM
Function Sets the message item, which is one of the ID and
data conditions, for CAN bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN[:
IDData]:MSIGnal:MESSage:
ITEM {<String>}
<String> = Up to 32 characters
Example
:TRIGGER:ATRIGGER:CAN:IDDATA:MSIGNAL:
MESSAGE:ITEM "TEST"
:TRIGger{[:ATRigger]|:BTRigger}:CAN[
:IDData]:MSIGnal:SELect
Function Sets or queries the message and signal conditions
for CAN bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN[:
IDData]:MSIGnal:SELect {MESSage|
SIGNal}
:TRIGger{[:ATRigger]|:BTRigger}:CAN[:
IDData]:MSIGnal:SELect?
Example
:TRIGGER:ATRIGGER:CAN:IDDATA:MSIGNAL:
SELECT MESSAGE
:TRIGGER:ATRIGGER:CAN:IDDATA:MSIGNAL:
SELECT?
-> :TRIGGER:ATRIGGER:CAN:IDDATA:MSIGN
AL:SELECT MESSAGE
:TRIGger{[:ATRigger]|:BTRigger}:CAN[
:IDData]:MSIGnal:SIGNal?
Function Queries all signal settings for the ID and data
conditions for CAN bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN[:
IDData]:MSIGnal:SIGNal?
:TRIGger{[:ATRigger]|:BTRigger}:CAN[
:IDData]:MSIGnal:SIGNal:CONDition
Function Sets or queries the signal data condition, which
is one of the ID and data conditions, for CAN bus
signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN[:
IDData]:MSIGnal:SIGNal:CONDition {BET
Ween|EQUal|GREater|LESS|NOTBetween|NO
TEqul}
:TRIGger{[:ATRigger]|:BTRigger}:CAN[:
IDData]:MSIGnal:SIGNal:CONDition?
Example
:TRIGGER:ATRIGGER:CAN:IDDATA:MSIGNAL:
SIGNAL:CONDITION BETWEEN
:TRIGGER:ATRIGGER:CAN:IDDATA:MSIGNAL:
SIGNAL:CONDITION?
-> :TRIGGER:ATRIGGER:CAN:IDDATA:MSIGN
AL:SIGNAL:CONDITION BETWEEN
5.33 TRIGger Group

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English