YOKOGAWA DLM2000 Series User Manual

5-238
IM 710105-17E
:TRIGger{[:ATRigger]|:BTRigger}:CAN[
:IDData]:MSIGnal:SIGNal:DECimal<x>
Function Sets a signal reference value, which is one of
the ID and data conditions, for CAN bus signal
triggering in decimal notation.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CA
N[:IDData]:MSIGnal:SIGNal:DECimal
<x> {<NRf>}
:TRIGger{[:ATRigger]|:BTRigger}:CAN[:
IDData]:MSIGnal:SIGNal:DECimal<x>?
<x> = 1 or 2
<NRf> = See the DLM2000 Feature Guide for this
information.
Example
:TRIGGER:ATRIGGER:CAN:IDDATA:MSIGNAL:
SIGNAL:DECIMAL1 1
:TRIGGER:ATRIGGER:CAN:IDDATA:MSIGNAL:
SIGNAL:DECIMAL1?
-> :TRIGGER:ATRIGGER:CAN:IDDATA:MSIGN
AL:SIGNAL:DECIMAL1 1.000E+00
:TRIGger{[:ATRigger]|:BTRigger}:CAN[
:IDData]:MSIGnal:SIGNal:ITEM
Function Sets the signal item, which is one of the ID and
data conditions, for CAN bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN[:
IDData]:MSIGnal:SIGNal:
ITEM {<String>,<String>}
<String> = Up to 32 characters
Example
:TRIGGER:ATRIGGER:CAN:IDDATA:MSIGNAL:
SIGNAL:ITEM "Sig_Test","Mess_Test"
Description Set the signal item first and then the message
item.
:TRIGger{[:ATRigger]|:BTRigger}:CAN[
:IDData]:RTR
Function Sets or queries the RTR value, which is one of
the ID and data conditions, for CAN bus signal
triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN[:
IDData]:RTR {<Boolean>}
:TRIGger{[:ATRigger]|:BTRigger}:CAN[:
IDData]:RTR?
Example
:TRIGGER:ATRIGGER:CAN:IDDATA:RTR ON
:TRIGGER:ATRIGGER:CAN:IDDATA:RTR?
-> :TRIGGER:ATRIGGER:CAN:IDDATA:RTR 1
:TRIGger{[:ATRigger]|:BTRigger}:CAN:
IDOR?
Function Queries all IDOR condition settings for CAN bus
signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN:I
DOR?
:TRIGger{[:ATRigger]|:BTRigger}:CAN:
IDOR:ACK?
Function Queries all IDOR condition ACK settings for CAN
bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN:I
DOR:ACK?
:TRIGger{[:ATRigger]|:BTRigger}:CAN:
IDOR:ACK:MODE
Function Sets or queries the ACK mode, which is one of the
IDOR conditions, for CAN bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN:I
DOR:ACK:MODE {<Boolean>}
:TRIGger{[:ATRigger]|:BTRigger}:CAN:I
DOR:ACK:MODE?
Example
:TRIGGER:ATRIGGER:CAN:IDOR:ACK:MO
DE ON
:TRIGGER:ATRIGGER:CAN:IDOR:ACK:MODE?
-> :TRIGGER:ATRIGGER:CAN:IDOR:ACK:MO
DE 1
:TRIGger{[:ATRigger]|:BTRigger}:CAN:
IDOR:ACK:TYPE
Function Sets or queries the ACK condition, which is
one of the IDOR conditions, for CAN bus signal
triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN:I
DOR:ACK:TYPE {ACK|ACKBoth|NONack}
:TRIGger{[:ATRigger]|:BTRigger}:CAN:I
DOR:ACK:TYPE?
Example
:TRIGGER:ATRIGGER:CAN:IDOR:ACK:TY
PE ACK
:TRIGGER:ATRIGGER:CAN:IDOR:ACK:TYPE?
-> :TRIGGER:ATRIGGER:CAN:IDOR:ACK:TY
PE ACK
:TRIGger{[:ATRigger]|:BTRigger}:CAN:
IDOR:DATA?
Function Queries all data settings for the IDOR condition for
CAN bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN:I
DOR:DATA?
:TRIGger{[:ATRigger]|:BTRigger}:CAN:
IDOR:DATA[:MODE]
Function Sets or queries the data enable/disable condition,
which is one of the IDOR conditions, for CAN bus
signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN:I
DOR:DATA[:MODE] {<Boolean>}
:TRIGger{[:ATRigger]|:BTRigger}:CAN:I
DOR:DATA[:MODE]?
Example
:TRIGGER:ATRIGGER:CAN:IDOR:DATA:MO
DE ON
:TRIGGER:ATRIGGER:CAN:IDOR:DATA:MODE?
-> :TRIGGER:ATRIGGER:CAN:IDOR:DATA:MO
DE 1
5.33 TRIGger Group

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English