YOKOGAWA DLM2000 Series User Manual

5-239
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
:TRIGger{[:ATRigger]|:BTRigger}:CAN:
IDOR:IDENtifier?
Function Queries all identifier settings for the IDOR
condition for CAN bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN:I
DOR:IDENtifier?
:TRIGger{[:ATRigger]|:BTRigger}:CAN:
IDOR:IDENtifier:ID<x>?
Function Queries all IDOR condition ID settings for CAN
bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN:I
DOR:IDENtifier:ID<x>?
<x> = 1 to 4
:TRIGger{[:ATRigger]|:BTRigger}:CAN:
IDOR:IDENtifier:ID<x>:HEXa
Function Sets the ID value, which is one of the IDOR
conditions, for CAN bus signal triggering in
hexadecimal notation.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN:I
DOR:IDENtifier:ID<x>:HEXa {<String>}
<x> = 1 to 4
Example
:TRIGGER:ATRIGGER:CAN:IDOR:IDENTIFIER
:ID1:HEXA "1AB"
:TRIGger{[:ATRigger]|:BTRigger}:CAN:
IDOR:IDENtifier:ID<x>:MODE
Function Sets or queries the ID enable/disable condition,
which is one of the IDOR conditions, for CAN bus
signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN:I
DOR:IDENtifier:ID<x>:MODE {<Boolean>}
:TRIGger{[:ATRigger]|:BTRigger}:CAN:I
DOR:IDENtifier:ID<x>:MODE?
<x> = 1 to 4
Example
:TRIGGER:ATRIGGER:CAN:IDOR:
IDENTIFIER:ID1:MODE ON
:TRIGGER:ATRIGGER:CAN:IDOR:
IDENTIFIER:ID1:MODE?
-> :TRIGGER:ATRIGGER:CAN:IDOR:IDENTIF
IER:ID1:MODE 1
:TRIGger{[:ATRigger]|:BTRigger}:CAN:
IDOR:IDENtifier:ID<x>:PATTern
Function Sets or queries the ID pattern, which is one of the
IDOR conditions, for CAN bus signal triggering in
binary notation.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:
CAN:IDOR:IDENtifier:ID<x>:PATTe
rn {<String>}
:TRIGger{[:ATRigger]|:BTRigger}:CAN:I
DOR:IDENtifier:ID<x>:PATTern?
<x> = 1 to 4
Example
:TRIGGER:ATRIGGER:CAN:IDOR:
IDENTIFIER:ID1:PATTERN "11100001111"
:TRIGGER:ATRIGGER:CAN:IDOR:
IDENTIFIER:ID1:PATTERN?
-> :TRIGGER:ATRIGGER:CAN:IDOR:IDENTIF
IER:ID1:PATTERN "11100001111"
:TRIGger{[:ATRigger]|:BTRigger}:CAN:
IDOR:IDENtifier:MODE
Function Sets or queries the identifier enable/disable
condition, which is one of the IDOR conditions, for
CAN bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN:I
DOR:IDENtifier:MODE {<Boolean>}
Example
:TRIGGER:ATRIGGER:CAN:IDOR:
IDENTIFIER:MODE ON
:TRIGger{[:ATRigger]|:BTRigger}:CAN:
IDOR:IDENtifier:MFORmat
Function Sets or queries the ID frame format (standard or
extended), which is one of the IDOR conditions,
for CAN bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN:I
DOR:IDENtifier:MFORmat {EXTended|STAN
dard}
:TRIGger{[:ATRigger]|:BTRigger}:CAN:I
DOR:IDENtifier:MFORmat?
Example
:TRIGGER:ATRIGGER:CAN:IDOR:
IDENTIFIER:MFORMAT EXTENDED
:TRIGGER:ATRIGGER:CAN:IDOR:
IDENTIFIER:MFORMAT?
-> :TRIGGER:ATRIGGER:CAN:IDOR:IDENTIF
IER:MFORMAT EXTENDED
5.33 TRIGger Group

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English