YOKOGAWA DLM2000 Series User Manual

5-240
IM 710105-17E
:TRIGger{[:ATRigger]|:BTRigger}:CAN:
IDOR:IDENtifier:PFORmat
Function Sets or queries the ID input format, which is
one of the IDOR conditions, for CAN bus signal
triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN:I
DOR:IDENtifier:PFORmat {BINary|HEXa|M
ESSage}
:TRIGger{[:ATRigger]|:BTRigger}:CAN:I
DOR:IDENtifier:PFORmat?
Example
:TRIGGER:ATRIGGER:CAN:IDOR:
IDENTIFIER:PFORMAT BINARY
:TRIGGER:ATRIGGER:CAN:IDOR:
IDENTIFIER:PFORMAT?
-> :TRIGGER:ATRIGGER:CAN:IDOR:IDENTIF
IER:PFORMAT BINARY
:TRIGger{[:ATRigger]|:BTRigger}:CAN:
IDOR:MSIGnal<x>:MESSage:ITEM
Function Sets the message item, which is one of the IDOR
conditions, for CAN bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN:I
DOR:MSIGnal<x>:MESSage:
ITEM {<String>}
<x> = 1 to 4
<String> = Up to 32 characters
Example
:TRIGGER:ATRIGGER:CAN:IDOR:MSIGNAL1:M
ESSAGE:ITEM "TEST"
:TRIGger{[:ATRigger]|:BTRigger}:CAN:
IDOR:RTR
Function Sets or queries the RTR value, which is one of the
IDOR conditions, for CAN bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN:I
DOR:RTR {<Boolean>}
:TRIGger{[:ATRigger]|:BTRigger}:CAN:I
DOR:RTR?
Example
:TRIGGER:ATRIGGER:CAN:IDOR:RTR ON
:TRIGGER:ATRIGGER:CAN:IDOR:RTR?
-> :TRIGGER:ATRIGGER:CAN:IDOR:RTR 1
:TRIGger{[:ATRigger]|:BTRigger}:CAN:
MODE
Function Sets or queries the CAN bus signal trigger mode
setting.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN:M
ODE {EFRame|IDData|IDOR|SOF}
:TRIGger{[:ATRigger]|:BTRigger}:CAN:M
ODE?
Example
:TRIGGER:ATRIGGER:CAN:MODE EFRAME
:TRIGGER:ATRIGGER:CAN:MODE?
-> :TRIGGER:ATRIGGER:CAN:MODE EFRAME
:TRIGger{[:ATRigger]|:BTRigger}:CAN:
RECessive
Function Sets or queries the CAN bus signal trigger
recessive level.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN:R
ECessive {HIGH|LOW}
:TRIGger{[:ATRigger]|:BTRigger}:CAN:R
ECessive?
Example
:TRIGGER:ATRIGGER:CAN:RECESSIVE HIGH
:TRIGGER:ATRIGGER:CAN:RECESSIVE?
-> :TRIGGER:ATRIGGER:CAN:RECESSIVE HI
GH
:TRIGger{[:ATRigger]|:BTRigger}:CAN:
SOURce
Function Sets or queries the CAN bus signal trigger source
signal.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN:S
OURce {<NRf>}
:TRIGger{[:ATRigger]|:BTRigger}:CAN:S
OURce?
<NRf> = 1 to 4
Example
:TRIGGER:ATRIGGER:CAN:SOURCE 1
:TRIGGER:ATRIGGER:CAN:SOURCE?
-> :TRIGGER:ATRIGGER:CAN:SOURCE 1
:TRIGger{[:ATRigger]|:BTRigger}:CAN:
SPOint
Function Sets or queries the CAN bus signal trigger sample
point.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN:S
POint {<NRf>}
:TRIGger{[:ATRigger]|:BTRigger}:CAN:S
POint?
<NRf> = 18.8 to 90.6
Example
:TRIGGER:ATRIGGER:CAN:SPOINT 18.8
:TRIGGER:ATRIGGER:CAN:SPOINT?
-> :TRIGGER:ATRIGGER:CAN:SPOINT 18.8
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray?
Function Queries all FLEXRAY bus signal trigger settings.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:FLEXr
ay?
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray:BCHannel
Function Sets or queries the channel bus type for FLEXRAY
bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:FLEXr
ay:BCHannel {A|B}
:TRIGger{[:ATRigger]|:BTRigger}:FLEXr
ay:BCHannel?
Example
:TRIGGER:ATRIGGER:FLEXRAY:BCHANNEL A
:TRIGGER:ATRIGGER:FLEXRAY:BCHANNEL?
-> :TRIGGER:ATRIGGER:FLEXRAY:BCHANN
EL A
5.33 TRIGger Group

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English