YOKOGAWA DLM2000 Series - Page 302

5-269
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
:TRIGger[:ATRigger]:CANFD:IDOR:IDENt
ifier:ID<x>:MODE
Function Sets or queries the ID enable/disable condition,
which is one of the IDOR conditions, for CAN FD
bus signal triggering.
Syntax
:TRIGger[:ATRigger]:CANFD:IDOR:IDENti
fier:ID<x>:MODE {<Boolean>}
:TRIGger[:ATRigger]:CANFD:IDOR:IDENti
fier:ID<x>:MODE?
<x> = 1 to 4
Example
:TRIGGER:ATRIGGER:CANFD:IDOR:IDENTIFI
ER:ID1:MODE ON
:TRIGGER:ATRIGGER:CANFD:IDOR:IDENTIFI
ER:ID1:MODE?
-> :TRIGGER:ATRIGGER:CANFD:IDOR:IDENT
IFIER:ID1:MODE 1
:TRIGger[:ATRigger]:CANFD:IDOR:IDENt
ifier:ID<x>:PATTern
Function Sets or queries the ID condition, which is one
of the IDOR conditions, for CAN FD bus signal
triggering in binary notation.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:
CANFD:IDOR:IDENtifier:ID<x>:PATTe
rn {<String>}
:TRIGger{[:ATRigger]|:BTRigger}:
CANFD:IDOR:IDENtifier:ID<x>:PATTern?
<x> = 1 to 4
Example
:TRIGGER:ATRIGGER:CANFD:IDOR:IDENTIFI
ER:ID1:PATTERN "11100001111"
:TRIGGER:ATRIGGER:CANFD:IDOR:IDENTIFI
ER:ID1:PATTERN?
-> :TRIGGER:ATRIGGER:CANFD:IDOR:IDENT
IFIER:ID1:PATTERN "11100001111"
:TRIGger[:ATRigger]:CANFD:IDOR:IDENt
ifier:MODE
Function Sets or queries the identifier enable/disable
condition, which is one of the IDOR conditions, for
CAN FD bus signal triggering.
Syntax
:TRIGger[:ATRigger]:CANFD:IDOR:IDENti
fier:MODE {<Boolean>}
Example
:TRIGGER:ATRIGGER:CANFD:IDOR:IDENTIFI
ER:MODE ON
:TRIGger[:ATRigger]:CANFD:IDOR:IDENt
ifier:MFORmat
Function Sets or queries the ID frame format (standard or
extended), which is one of the IDOR conditions,
for CAN FD bus signal triggering.
Syntax
:TRIGger[:ATRigger]:CANFD:IDOR:IDENti
fier:MFORmat {EXTended|STANdard}
:TRIGger[:ATRigger]:CANFD:IDOR:IDENti
fier:MFORmat?
Example
:TRIGGER:ATRIGGER:CANFD:IDOR:IDENTIFI
ER:MFORMAT EXTENDED
:TRIGGER:ATRIGGER:CANFD:IDOR:IDENTIFI
ER:MFORMAT?
-> :TRIGGER:ATRIGGER:CANFD:IDOR:IDENT
IFIER:MFORMAT EXTENDED
:TRIGger[:ATRigger]:CANFD:IDOR:IDENt
ifier:PFORmat
Function Sets or queries the ID input format, which is one
of the IDOR conditions, for CAN FD bus signal
triggering.
Syntax
:TRIGger[:ATRigger]:CANFD:IDOR:IDENti
fier:PFORmat {BINary|HEXa|MESSage}
:TRIGger[:ATRigger]:CANFD:IDOR:IDENti
fier:PFORmat?
Example
:TRIGGER:ATRIGGER:CANFD:IDOR:IDENTIFI
ER:PFORMAT BINARY
:TRIGGER:ATRIGGER:CANFD:IDOR:IDENTIFI
ER:PFORMAT?
-> :TRIGGER:ATRIGGER:CANFD:IDOR:IDENT
IFIER:PFORMAT BINARY
:TRIGger[:ATRigger]:CANFD:IDOR:MSIGn
al<x>:MESSage:ITEM
Function Sets the message item, which is one of the IDOR
conditions, for CAN FD bus signal triggering.
Syntax
:TRIGger[:ATRigger]:CANFD:IDOR:MSIGna
l<x>:MESSage:ITEM {<String>}
<X> = 1 to 4
<String> = Up to 32 characters
Example
:TRIGGER:ATRIGGER:CANFD:IDOR:
MSIGNAL1:MESSAGE:ITEM "TEST"
:TRIGger[:ATRigger]:CANFD:IDOR:RTR
Function Sets or queries the RTR, which is one of the IDOR
conditions, for CAN FD bus signal triggering.
Syntax
:TRIGger[:ATRigger]:CANFD:IDOR:
RTR {<Boolean>}
:TRIGger[:ATRigger]:CANFD:IDOR:RTR?
Example
:TRIGGER:ATRIGGER:CANFD:IDOR:RTR ON
:TRIGGER:ATRIGGER:CANFD:IDOR:RTR?
-> :TRIGGER:ATRIGGER:CANFD:IDOR:RTR 1
5.33 TRIGger Group