YOKOGAWA DLM2000 Series - Page 306

5-273
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
:TRIGger[:ATRigger]:SENT:PPULse
Function Sets or queries the presence or absence of pause
pulses for SENT signal triggering.
Syntax
:TRIGger[:ATRigger]:SENT:PPULse {NPP|
PP|PPC}
:TRIGger[:ATRigger]:SENT:PPULse?
Example
:TRIGGER:ATRIGGER:SENT:PPULSE NPP
:TRIGGER:ATRIGGER:SENT:PPULSE?
-> :TRIGGER:ATRIGGER:SENT:PPULSE NPP
:TRIGger[:ATRigger]:SENT:SOURce
Function Sets or queries the SENT signal trigger source.
Syntax
:TRIGger[:ATRigger]:SENT:SOURce {<NRf
>|BIT<x>}
:TRIGger[:ATRigger]:SENT:SOURce?
<NRf> = 1 to 4
<x> of BIT<x> = 1 to 8
Example
:TRIGGER:ATRIGGER:SENT:SOURCE 1
:TRIGGER:ATRIGGER:SENT:SOURCE?
-> :TRIGGER:ATRIGGER:SENT:SOURCE 1
:TRIGger[:ATRigger]:SENT:VERSion
Function Sets or queries the SENT signal analysis
specification version.
Syntax
:TRIGger[:ATRigger]:SENT:VERSi
on {FEB2008|JAN2010}
:TRIGger[:ATRigger]:SENT:VERESion?
Example
:TRIGGER:ATRIGGER:SENT:VERSION JAN201
0
:TRIGGER:ATRIGGER:SENT:VERSION?
-> :TRIGGER:ATRIGGER:SENT:VERSION JAN
2010
:TRIGger[:ATRigger]:TV?
Function Queries all TV trigger settings.
Syntax
:TRIGger[:ATRigger]:TV?
:TRIGger[:ATRigger]:TV:FIELd
Function Sets or queries the field where TV triggering will
be used.
Syntax
:TRIGger[:ATRigger]:TV:FIELd {DONTcar
e|
<NRf>}
:TRIGger[:ATRigger]:TV:FIELd?
<NRf> = 1 or 2
Example
:TRIGGER:ATRIGGER:TV:FIELD 1
:TRIGGER:ATRIGGER:TV:FIELD?
-> :TRIGGER:ATRIGGER:TV:FIELD 1
:TRIGger[:ATRigger]:TV:FRAMe
Function Sets or queries the frame skip feature for TV
triggering.
Syntax
:TRIGger[:ATRigger]:TV:FRAMe {<NRf>}
:TRIGger[:ATRigger]:TV:FRAMe?
<NRf> = 1, 2, 4, or 8
Example
:TRIGGER:ATRIGGER:TV:FRAME 2
:TRIGGER:ATRIGGER:TV:FRAME?
-> :TRIGGER:ATRIGGER:TV:FRAME 2
:TRIGger[:ATRigger]:TV:{HDTV|NTSC|PA
L|SDTV|USERdefine}?
Function Queries all TV trigger mode settings.
Syntax
:TRIGger[:ATRigger]:TV:
{HDTV|NTSC|PAL|SDTV|USERdefine}?
:TRIGger[:ATRigger]:TV:{HDTV|NTSC|PA
L|SDTV|USERdefine}:LINE
Function Sets or queries the line where TV triggering will be
used.
Syntax
:TRIGger[:ATRigger]:TV:{HDTV|NTSC|
PAL|SDTV|USERdefine}:LINE {<NRf>}
:TRIGger[:ATRigger]:TV:{HDTV|NTSC|
PAL|SDTV|USERdefine}:LINE?
<NRf> = 2 to 2251
Example Below are examples for HDTV.)
:TRIGGER:ATRIGGER:TV:HDTV:LINE 2
:TRIGGER:ATRIGGER:TV:HDTV:LINE?
-> :TRIGGER:ATRIGGER:TV:HDTV:LINE 2
:TRIGger[:ATRigger]:TV:{HDTV|NTSC|PA
L|SDTV|USERdefine}:POLarity
Function Sets or queries the TV trigger input polarity.
Syntax
:TRIGger[:ATRigger]:TV:{HDTV|NTSC|
PAL|SDTV|USERdefine}:POLarity {POSiti
ve|NEGative}
:TRIGger[:ATRigger]:TV:{HDTV|NTSC|
PAL|SDTV|USERdefine}:POLarity?
Example Below are examples for HDTV.)
:TRIGGER:ATRIGGER:TV:HDTV:
POLARITY POSITIVE
:TRIGGER:ATRIGGER:TV:HDTV:POLARITY?
-> :TRIGGER:ATRIGGER:TV:HDTV:
POLARITY POSITIVE
:TRIGger[:ATRigger]:TV:LEVel
Function Sets or queries the TV trigger level.
Syntax
:TRIGger[:ATRigger]:TV:LEVel {<NRf>}
:TRIGger[:ATRigger]:TV:LEVel?
<NRf> = 0.1 to 2.0 divisions in 0.1 steps
Example
:TRIGGER:ATRIGGER:TV:LEVEL 0.1
:TRIGGER:ATRIGGER:TV:LEVEL?
-> :TRIGGER:ATRIGGER:TV:LEVEL 0.1
5.33 TRIGger Group