YOKOGAWA DLM2000 Series - Page 305

5-272
IM 710105-17E
:TRIGger[:ATRigger]:PSI5:SETup:DATA:
DBITs
Function Sets or queries the data length for PSI5 signal
triggering.
Syntax
:TRIGger[:ATRigger]:PSI5:SETup:DATA:D
BITs {<NRf>}
:TRIGger[:ATRigger]:PSI5:SETup:DATA:D
BITs?
<NRf> = 10, 16
Example
:TRIGGER:ATRIGGER:PSI5:SETUP:DATA:DBI
TS 10
:TRIGGER:ATRIGGER:PSI5:SETUP:DATA:DBI
TS?
-> :TRIGGER:ATRIGGER:PSI5:SETUP:DATA:
DBITS 10
:TRIGger[:ATRigger]:PSI5:SETup:DATA:
EDETection
Function Sets or queries the error detection method for
PSI5 signal triggering.
Syntax
:TRIGger[:ATRigger]:PSI5:SETup:DATA:E
DETection {CRC|PARity}
:TRIGger[:ATRigger]:PSI5:SETup:DATA:E
DETection?
Example
:TRIGGER:ATRIGGER:PSI5:SETUP:DATA:EDE
TECTION CRC
:TRIGGER:ATRIGGER:PSI5:SETUP:DATA:EDE
TECTION?
-> :TRIGGER:ATRIGGER:PSI5:SETUP:DATA:
EDETECTION CRC
:TRIGger[:ATRigger]:PSI5:SETup:DATA:
SOURce
Function Sets or queries the data source for PSI5 signal
triggering.
Syntax
:TRIGger[:ATRigger]:PSI5:SETup:DATA:S
OURce {<NRf>}
:TRIGger[:ATRigger]:PSI5:SETup:DATA:S
OURce?
<NRf> = 1 to 4
Example
:TRIGGER:ATRIGGER:PSI5:SETUP:DATA:SOU
RCE 1
:TRIGGER:ATRIGGER:PSI5:SETUP:DATA:SOU
RCE?
-> :TRIGGER:ATRIGGER:PSI5:SETUP:DATA:
SOURCE 1
:TRIGger[:ATRigger]:PSI5:SETup:SYNC
Function Sets or queries the sync signal for PSI5 signal
triggering.
Syntax
:TRIGger[:ATRigger]:PSI5:SETup:SY
NC {<NRf>|NONE}
:TRIGger[:ATRigger]:PSI5:SETup:SYNC?
<NRf> = 1 to 4
Example
:TRIGGER:ATRIGGER:PSI5:SETUP:SYNC 1
:TRIGGER:ATRIGGER:PSI5:SETUP:SYNC?
-> :TRIGGER:ATRIGGER:PSI5:SETUP:SYNC
1
:TRIGger[:ATRigger]:PULSe?
Function Queries all pulse width trigger settings.
Syntax
:TRIGger[:ATRigger]:PULSe?
:TRIGger[:ATRigger]:PULSe:POLarity
Function Sets or queries the pulse width trigger source
polarity.
Syntax
:TRIGger[:ATRigger]:PULSe:POLari
ty {IN|NEGative|OUT|POSitive}
:TRIGger[:ATRigger]:PULSe:POLarity?
Example
:TRIGGER:ATRIGGER:PULSE:POLARITY IN
:TRIGGER:ATRIGGER:PULSE:POLARITY?
-> :TRIGGER:ATRIGGER:PULSE:POLARI
TY IN
Description Select
{IN|OUT}
when
:TRIGGER:SOURCE:
CHANNEL<x>:WINDOW ON
is specified. Select
{NEGative|POSitive}
otherwise.
:TRIGger[:ATRigger]:PULSe:SOURce
Function Sets or queries the pulse width trigger source.
Syntax
:TRIGger[:ATRigger]:PULSe:SOUR
ce {<NRf>|EXTernal|BIT<x>}
:TRIGger[:ATRigger]:PULSe:SOURce?
<NRf> = 1 to 4 (1 or 2 for 2-channel models)
<x> of BIT<x> = 1 to 8
Example
:TRIGGER:ATRIGGER:PULSE:SOURCE 1
:TRIGGER:ATRIGGER:PULSE:SOURCE?
-> :TRIGGER:ATRIGGER:PULSE:SOURCE 1
:TRIGger[:ATRigger]:SENT?
Function Queries all SENT signal trigger settings.
Syntax
:TRIGger[:ATRigger]:SENT?
:TRIGger[:ATRigger]:SENT:CTICk
Function Sets or queries the SENT signal trigger clock tick
value.
Syntax
:TRIGger[:ATRigger]:SENT:CTICk {<NRf>
}:TRIGger[:ATRigger]:SENT:CTICk?
<NRf> = 1.00 us to 100.00 us (resolution:0.01 us)
Example
:TRIGGER:ATRIGGER:SENT:CTICK 0.000001
:TRIGGER:ATRIGGER:SENT:CTICK?
-> :TRIGGER:ATRIGGER:SENT:CTICK 1.000
000E-06
:TRIGger[:ATRigger]:SENT:FLENgth
Function Sets or queries the SENT signal trigger frame
length (clock ticks).
Syntax
:TRIGger[:ATRigger]:SENT:FLENg
th {<NRf>}
:TRIGger[:ATRigger]:SENT:FLENgth?
<NRf> = 146 (clock ticks) to 937(clock ticks)
Example
:TRIGGER:ATRIGGER:SENT:FLENGTH 294
:TRIGGER:ATRIGGER:SENT:FLENGTH?
-> :TRIGGER:ATRIGGER:SENT:FLENGTH 294
5.33 TRIGger Group