YOKOGAWA DLM2000 Series User Manual

5-275
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
:TRIGger[:ATRigger]:TV:USERdefine:PO
Larity
Function Sets or queries the user-defined TV trigger input
polarity.
Syntax
:TRIGger[:ATRigger]:TV:USERdefine:POL
arity {POSitive|NEGative}
:TRIGger[:ATRigger]:TV:USERdefine:POL
arity?
Example
:TRIGGER:ATRIGGER:TV:USERDEFINE:POLAR
ITY POSITIVE
:TRIGGER:ATRIGGER:TV:USERDEFINE:POLAR
ITY?
-> :TRIGGER:ATRIGGER:TV:USERDEFINE:PO
LARITY POSITIVE
:TRIGger[:ATRigger]:TV:USERdefine:SG
Uard
Function Sets or queries the user-defined TV trigger sync
guard setting.
Syntax
:TRIGger[:ATRigger]:TV:USERdefine:SGU
ard {<NRf>}
:TRIGger[:ATRigger]:TV:USERdefine:SGU
ard?
<NRf> = 60 to 90(%)
Example
:TRIGGER:ATRIGGER:TV:USERDEFINE:SGUA
RD 60
:TRIGGER:ATRIGGER:TV:USERDEFINE:SGUA
RD?
-> :TRIGGER:ATRIGGER:TV:USERDEFINE:SG
UARD 60
:TRIGger[:ATRigger]:WIDTh?
Function Queries all state width trigger settings.
Syntax
:TRIGger[:ATRigger]:WIDTh?
:TRIGger[:ATRigger]:WIDTh:BITS?
Function Queries all logic input settings for state width
triggering.
Syntax
:TRIGger[:ATRigger]:WIDTh:BITS?
:TRIGger[:ATRigger]:WIDTh:BITS:HEXa
Function Sets the logic input state for state width triggering
in hexadecimal notation.
Syntax
:TRIGger[:ATRigger]:WIDTh:BITS:
HEXa {<String>}
Example
:TRIGGER:ATRIGGER:WIDTH:BITS:
HEXA "A1"
:TRIGger[:ATRigger]:WIDTh:BITS:PATTe
rn
Function Sets or queries the logic input state pattern for
state width triggering.
Syntax
:TRIGger[:ATRigger]:WIDTh:BITS:PATTe
rn {<String>}
:TRIGger[:ATRigger]:WIDTh:BITS:PATTe
rn?
Example
:TRIGGER:ATRIGGER:WIDTH:BITS:PATTE
RN "10110011"
:TRIGGER:ATRIGGER:WIDTH:BITS:PATTERN?
-> :TRIGGER:ATRIGGER:WIDTH:BITS:PATTE
RN "10110011"
:TRIGger[:ATRigger]:WIDTh:CHANnel<x>
Function Sets or queries the trigger condition of a channel
for state width triggering.
Syntax
:TRIGger[:ATRigger]:WIDTh:CHANnel
<x> {DONTcare|HIGH|IN|LOW|OFF|OUT}
:TRIGger[:ATRigger]:WIDTh:CHANnel<x>?
<x> = 1 to 4
<NRf> = 1 to 4 (1 or 2 for 2-channel models)
Example
:TRIGGER:ATRIGGER:WIDTH:CHANNEL1 HIGH
:TRIGGER:ATRIGGER:WIDTH:CHANNEL1?
-> :TRIGGER:ATRIGGER:WIDTH:CHANN
EL1 HIGH
Description Select {
IN|OFF|OUT
} when
:TRIGger:WIDTh:WINDow ON
is specified.
Select {
DONTcare|HIGH|LOW
} otherwise.
:TRIGger[:ATRigger]:WIDTh:CLOCk?
Function Queries all clock signal settings for state width
triggering.
Syntax
:TRIGger[:ATRigger]:WIDTh:CLOCk?
:TRIGger[:ATRigger]:WIDTh:CLOCk:POLa
rity
Function Sets or queries the clock signal polarity for state
width triggering.
Syntax
:TRIGger[:ATRigger]:WIDTh:CLOCk:POLar
ity {RISE|FALL}
:TRIGger[:ATRigger]:WIDTh:CLOCk:POLar
ity?
Example
:TRIGGER:ATRIGGER:WIDTH:CLOCK:POLARI
TY RISE
:TRIGGER:ATRIGGER:WIDTH:CLOCK:POLARI
TY?
-> :TRIGGER:ATRIGGER:WIDTH:CLOCK:POLA
RITY RISE
5.33 TRIGger Group

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English