YOKOGAWA DLM2000 Series User Manual

5-276
IM 710105-17E
:TRIGger[:ATRigger]:WIDTh:CLOCk:SOUR
ce
Function Sets or queries the clock signal for state width
triggering.
Syntax
:TRIGger[:ATRigger]:WIDTh:CLOCk:SOUR
ce {<NRf>|DONTcare|BIT<x>}
:TRIGger[:ATRigger]:WIDTh:CLOCk:SOUR
ce?
<NRf> = 1 to 4 (1 or 2 for 2-channel models)
<x> of BIT<x> = 1 to 8
Example
:TRIGGER:ATRIGGER:WIDTH:CLOCK:SOUR
CE 1
:TRIGGER:ATRIGGER:WIDTH:CLOCK:SOURCE?
-> :TRIGGER:ATRIGGER:WIDTH:CLOCK:SOUR
CE 1
:TRIGger[:ATRigger]:WIDTh:CONDition
Function Sets or queries the trigger condition for state width
triggering.
Syntax
:TRIGger[:ATRigger]:WIDTh:CONDiti
on {TRUE|FALSe}
:TRIGger[:ATRigger]:WIDTh:CONDition?
Example
:TRIGGER:ATRIGGER:WIDTH:CONDITION TRU
E
:TRIGGER:ATRIGGER:WIDTH:CONDITION?
-> :TRIGGER:ATRIGGER:WIDTH:
CONDITION TRUE
:TRIGger[:ATRigger]:WIDTh:LOGic
Function Sets or queries the combination condition for state
width triggering.
Syntax
:TRIGger[:ATRigger]:WIDTh:LOGic {AND|
OR}
:TRIGger[:ATRigger]:WIDTh:LOGic?
Example
:TRIGGER:ATRIGGER:WIDTH:LOGIC AND
:TRIGGER:ATRIGGER:WIDTH:LOGIC?
-> :TRIGGER:ATRIGGER:WIDTH:LOGIC AND
:TRIGger[:ATRigger]:WIDTh:TIME<x>
Function Sets or queries the pulse width setting for state
width triggering.
Syntax
:TRIGger[:ATRigger]:WIDTh:TIME
<x> {<Time>}
:TRIGger[:ATRigger]:WIDTh:TIME<x>?
<x> = 1 or 2
<Time> = 4 ns to 10 s (in 2-ns steps)
Example
:TRIGGER:ATRIGGER:WIDTH:TIME1 1S
:TRIGGER:ATRIGGER:WIDTH:TIME1?
-> :TRIGGER:ATRIGGER:WIDTH:TIME1 1.00
0E+00
:TRIGger[:ATRigger]:WIDTh:TYPE
Function Sets or queries the time width mode for state
width triggering.
Syntax
:TRIGger[:ATRigger]:WIDTh:TYPE {IN|OU
T|BETWeen|NOTBetween|TIMeout}
:TRIGger[:ATRigger]:WIDTh:TYPE?
Example
:TRIGGER:ATRIGGER:WIDTH:TYPE IN
:TRIGGER:ATRIGGER:WIDTH:TYPE?
-> :TRIGGER:ATRIGGER:WIDTH:TYPE IN
:TRIGger:COMBination
Function Sets or queries the trigger combination.
Syntax
:TRIGger:COMBination {ABN|ADB|AORB|OF
F}
:TRIGger:COMBination?
Example
:TRIGGER:COMBINATION ABN
:TRIGGER:COMBINATION?
-> :TRIGGER:COMBINATION ABN
:TRIGger:DELay?
Function Queries all delay settings.
Syntax
:TRIGger:DELay?
:TRIGger:DELay:TIME
Function Sets or queries the delay (the time between the
trigger point and the trigger position).
Syntax
:TRIGger:DELay:TIME {<Time>}
:TRIGger:DELay:TIME?
<Time> = 0 to 10 s (in steps of 1/sample rate)
Example
:TRIGGER:DELAY:TIME 2US
:TRIGGER:DELAY:TIME?
->:TRIGGER:DELAY:TIME2.00E−06
Description The delay is fixed at zero when the time base is
set to an external clock. The trigger delay is set
as the amount of time from the trigger point to the
trigger position. You can set or query the trigger
position by using
:TRIGger:POSition
.
:TRIGger:HOLDoff?
Function Queries all hold-off settings.
Syntax
:TRIGger:HOLDoff?
:TRIGger:HOLDoff:TIME
Function Sets or queries the hold-off time.
Syntax
:TRIGger:HOLDoff:TIME {<Time>}
:TRIGger:HOLDoff:TIME?
<Time> = 20 ns to 10 s
Example
:TRIGGER:HOLDOFF:TIME 20NS
:TRIGGER:HOLDOFF:TIME?
-> :TRIGGER:HOLDOFF:TIME20.0E−09
5.33 TRIGger Group

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English