YOKOGAWA DLM2000 Series - Page 311

5-278
IM 710105-17E
:TRIGger:SOURce:CHANnel<x>:WIDTh
Function Sets or queries the window width of the specified
trigger source for enhanced triggering.
Syntax
:TRIGger:SOURce:CHANnel<x>:WID
Th {<Voltage>}
:TRIGger:SOURce:CHANnel<x>:WIDTh?
<x> = 1 to 4 (1 or 2 for 2-channel models)
<Voltage> = See the DLM2000 Features Guide for
this information.
Example
:TRIGGER:SOURCE:CHANNEL1:WIDTH 5V
:TRIGGER:SOURCE:CHANNEL1:WIDTH?
-> :TRIGGER:SOURCE:CHANNEL1:WIDTH 5.0
E+00
Description When the probe type is set to current, this
command sets or queries the <Current> value.
:TRIGger:SOURce:CHANnel<x>:WINDow
Function Sets or queries the window on/off status of the
specified trigger source for enhanced triggering.
Syntax
:TRIGger:SOURce:CHANnel<x>:WINDow {<B
oolean>}
:TRIGger:SOURce:CHANnel<x>:WINDow?
<x> = 1 to 4 (1 or 2 for 2-channel models)
Example
:TRIGGER:SOURCE:CHANNEL1:WINDOW ON
:TRIGGER:SOURCE:CHANNEL1:WINDOW?
-> :TRIGGER:SOURCE:CHANNEL1:WINDOW 1
5.33 TRIGger Group