YOKOGAWA DLM2000 Series User Manual

Appendix
App-3
IM 710105-17E
1
2
3
4
5
6
App
Index
Code Message Corrective Action Page
151 Invalid string data. The parameter is either too long, or it contains an
unusable character.
4-7 and
chapter 5
158 String data not allowed. Use a data type other than <String data>. 4-6 and
chapter 5
161 Invalid block data. <Block data> cannot be used. 4-7 and
chapter 5
168 Block data not allowed. <Block data> cannot be used. 4-7 and
chapter 5
171 Missing Right. Mathematical operations cannot be used. —
172 Invalid expression. Mathematical operations cannot be used. Chapter 5
178 Expression data not allowed. Mathematical operations cannot be used. Chapter 5
181 Invalid outside macro definition. The DLM2000 does not support the IEEE488.2 macro
specifications.
—
Communication Execution Errors (200 to 299)
Code Message Corrective Action Page
221 Setting conflict. Check settings that are related to each other. Chapter 5
222 Data out of range. Check the ranges of the settings. Chapter 5
223 Too much data. Check data byte lengths. Chapter 5
224 Illegal parameter value. Check the ranges of the settings. Chapter 5
225 OverFlow. Keep program messages to 1024 bytes or less in
length, including <PMT>.
4-2
226 Out Of Memory. Keep program messages to 1024 bytes or less in
length, including <PMT>.
4-2
241 Hardware missing. Check that the specified options are all installed. —
260 Expression error. Mathematical operations cannot be used. —
270 Macro error. The DLM2000 does not support the IEEE488.2 macro
specifications.
—
272 Macro execution error. The DLM2000 does not support the IEEE488.2 macro
specifications.
—
273 Illegal macro label. The DLM2000 does not support the IEEE488.2 macro
specifications.
—
275 Macro definition too long. The DLM2000 does not support the IEEE488.2 macro
specifications.
—
276 Macro recursion error. The DLM2000 does not support the IEEE488.2 macro
specifications.
—
277 Macro redefinition not allowed. The DLM2000 does not support the IEEE488.2 macro
specifications.
—
278 Macro header not found. The DLM2000 does not support the IEEE488.2 macro
specifications.
—
Appendix 2 Error Messages

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English