YOKOGAWA DLM4038 User Manual

5-115
IM DLM4038-17EN
Commands
1
2
3
4
5
6
App
Index
:HCOPy:NETPrint:TYPE
Function Sets or queries the network printer output
command type.
Syntax
:HCOPy:NETPrint:TYPE {EINKjet|
HINKjet|HLASer}
:HCOPy:NETPrint:TYPE?
Example
:HCOPY:NETPRINT:TYPE EINKJET
:HCOPY:NETPRINT:TYPE?
-> :HCOPY:NETPRINT:TYPE EINKJET
:HCOPy:PRINter?
Function Queries all built-in printer output settings.
Syntax
:HCOPy:PRINter?
Description You can use this command when the optional
built-in printer is installed.
:HCOPy:PRINter:MAG
Function Sets or queries the magnification used when the
DLM4000 prints to the built-in printer in long copy
mode.
Syntax
:HCOPy:PRINter:MAG {<NRf>}
:HCOPy:PRINter:MAG?
<NRf> = 2 to 10
Example
:HCOPY:PRINTER:MAG 2
:HCOPY:PRINTER:MAG?
-> :HCOPY:PRINTER:MAG 2.000E+00
Description This command can be used when the built-in
printer (option) is installed.
:HCOPy:PRINter:MODE
Function Sets or queries whether the DLM4000 will print
to the built-in printer in short, long, or hard copy
mode.
Syntax
:HCOPy:PRINter:MODE {HARD|LONG|SHORt
}
:HCOPy:PRINter:MODE?
Example
:HCOPY:PRINTER:MODE HARD
:HCOPY:PRINTER:MODE?
-> :HCOPY:PRINTER:MODE HARD
Description This command can be used when the built-in
printer (option) is installed.
:HCOPy:PRINter:RANGe
Function Sets or queries the source window used when
the DLM4000 prints to the built-in printer in long
copy mode.
Syntax
:HCOPy:PRINter:RANGe {MAIN|Z1|Z2}
:HCOPy:PRINter:RANGe?
Example
:HCOPY:PRINTER:RANGE MAIN
:HCOPY:PRINTER:RANGE?
-> :HCOPY:PRINTER:RANGE MAIN
Description This command can be used when the built-in
printer (option) is installed.
:HCOPy:PRINter:REPort
Function Sets or queries whether the DLM4000 will print
additional information on the built-in printer.
Syntax
:HCOPy:PRINter:REPort {<Boolean>}
:HCOPy:PRINter:REPort?
Example
:HCOPY:PRINTER:REPORT ON
:HCOPY:PRINTER:REPORT?
-> :HCOPY:PRINTER:REPORT 1
Description This command can be used when the built-in
printer (option) is installed.
:HCOPy:PRINter:TRANge
Function Sets or queries the output range used when the
DLM4000 prints to the built-in printer in long copy
mode.
Syntax
:HCOPy:PRINter:TRANge {<NRf>,<NRf>}
:HCOPy:PRINter:TRANge?
<NRf>,<NRf> = −5 to 5 (in steps of 10 divisions/
display record length)
Example
 :HCOPY:PRINTER:TRANGE−5
:HCOPY:PRINTER:TRANGE?
->:HCOPY:PRINTER:TRANGE−5
Description This command can be used when the built-in
printer (option) is installed.
5.15 HCOPy Group

YOKOGAWA DLM4038 Specifications

General

Brand	YOKOGAWA
Model	DLM4038
Category	Test Equipment
Language	English