YOKOGAWA DLM4038 - Page 151

5-118
IM DLM4038-17EN
:HISTory[:SEARch]:NUMBer<x>:PARamete
r:TRACe
Function Sets or queries the specified waveform
parameter's source waveform for parameter
searching.
Syntax
:HISTory[:SEARch]:NUMBer<x>:PARamete
r:TRACe {<NRf>|FFT<y>|MATH<y>|
PODA<y>|PODB<y>|PODL<y>|XY<y>}
:HISTory[:SEARch]:NUMBer<x>:PARamete
r:TRACe?
<x> = 1 to 4
<NRf> = 1 to 8
<y> of FFT<y> = 1 to 2
<y> of MATH<y> = 1 to 4
<y> of PODA<y>, PODB<y>, PODL<y> = 0 to 7
<y> of XY<y> = 1 to 4
Example
:HISTORY:SEARCH:NUMBER1:PARAMETER:TR
ACE 1
:HISTORY:SEARCH:NUMBER1:PARAMETER:TR
ACE?
-> :HISTORY:SEARCH:NUMBER1:
PARAMETER:TRACE 1
:HISTory[:SEARch]:NUMBer<x>:PARamete
r:VALue?
Function Queries the specified waveform parameter's
measured value for parameter searching.
Syntax
:HISTory[:SEARch]:NUMBer<x>:PARamete
r:VALue?
<x> = 1 to 4
Example
:HISTORY:SEARCH:NUMBER1:PARAMETER:VA
LUE?
-> :HISTORY:SEARCH:NUMBER1:
PARAMETER:VALUE1.98E−03
Description If
:HISTory[:SEARch]:NUMBer<x>:CONDit
ion
is set to OFF or when the value is otherwise
immeasurable, the DLM4000 returns “NAN” (not
a number).
:HISTory[:SEARch]:NUMBer<x>:POLYgon?
Function Queries all polygonal zone search settings.
Syntax
:HISTory[:SEARch]:NUMBer<x>:POLYgon?
<x> = 1 to 4
:HISTory[:SEARch]:NUMBer<x>:POLYgon:
HPOSition
Function Sets or queries the horizontal position that will be
used for polygonal zone searching.
Syntax
:HISTory[:SEARch]:NUMBer<x>:POLYgon:
HPOSition {<NRf>}
:HISTory[:SEARch]:NUMBer<x>:POLYgon:
HPOSition?
<x> = 1 to 4
<NRf> = −5 to 5 (divisions)
Example
:HISTORY:SEARCH:NUMBER1:POLYGON:HPOS
ITION 1
:HISTORY:SEARCH:NUMBER1:POLYGON:HPOS
ITION?
-> :HISTORY:SEARCH:NUMBER1:POLYGON:H
POSITION 1.000E+00
Description If
:HISTory[:SEARch]:NUMBer<x>:POLYgon
:TRACe
is set to XY<x>, the <NRf> is 1 to 4 (div).
:HISTory[:SEARch]:NUMBer<x>:POLYgon:
RANGe
Function Sets or queries the source window that will be
used for polygonal zone searching.
Syntax
:HISTory[:SEARch]:NUMBer<x>:POLYgon:
RANGe {MAIN|Z1|Z2}
:HISTory[:SEARch]:NUMBer<x>:POLYgon:
RANGe?
<x> = 1 to 4
Example
:HISTORY:SEARCH:NUMBER1:POLYGON:RAN
GE MAIN
:HISTORY:SEARCH:NUMBER1:POLYGON:RAN
GE?
-> :HISTORY:SEARCH:NUMBER1:POLYGON:R
ANGE MAIN
:HISTory[:SEARch]:NUMBer<x>:POLYgon:
TRACe
Function Sets or queries the source waveform that will be
used for polygonal zone searching.
Syntax
:HISTory[:SEARch]:NUMBer<x>:POLYgon:
TRACe {<NRf>|MATH<y>|XY<y>}
:HISTory[:SEARch]:NUMBer<x>:POLYgon:
TRACe?
<x> = 1 to 4
<NRf> = 1 to 8
<y> of MATH<y> = 1 to 4
<y> of XY<y> = 1 to 4
Example
:HISTORY:SEARCH:NUMBER1:POLYGON:TRA
CE 1
:HISTORY:SEARCH:NUMBER1:POLYGON:TRA
CE?
-> :HISTORY:SEARCH:NUMBER1:POLYGON:T
RACE 1
5.16 HISTory Group