5-4
IM DLM5058-03EN
Code Message and Corrective Action Section
514 Directory entry does not exist. —
515 Media error. Service is required. —
516 Media error. Service is required. —
517 End of the file. —
518 The same file or directory name exist.
Remove the file/directory or change the current path.
Chapter 17
*
519 Target file of Move or Copy has a read only property. Chapter 17
*
520 Assigned path does not exist or no media.
Check the path name and media.
Chapter 17
*
521 Destination folder assigned to Copy / Move is the same as the origin or sub folder.
Change the destination folder.
Chapter 17
*
522 No file name. Type in file name. Chapter 17
*
523 Auto file name failure. Change the type of auto file name or change the header of the auto
name.
Chapter 17
*
524 Improper file or path name. Check file / path name. Chapter 17
*
525 Improper file or path name. Check file / path name. Chapter 17
*
526 File is disintegrated. Check the file. —
527 File system error. Service is required. —
528 Illegal file name.
The name contains prohibited characters.
Change it to a different name.
Chapter 17
*
529 Illegal file name. The name is reserved by the system. Change it to a different name. Chapter 17
*
530 Load failure. Number of vortex exceeded the maximum.
Redefine the mask data.
—
531 Unable to open file. The may be opened by other process.
Try to open file later. If the problem still exist, service may be necessary.
—
532 Unable to save. Compressed record size exceeded current record size.
Change the compressed record size and execute again.
—
533 Assigned path does not exist.
Check the network setting and configuration.
Chapter 18
*
534 Assigned path does not exist.
Check the network setting and configuration.
Chapter 18
*
535 Network access is denied.
Check the network setting and configuration.
Chapter 18
*
536 File operation not supported in root directory.
Please verify the path name.
Chapter 17
*
537 A file which contains multiple saved traces can not be loaded into Ref.
Please load it into ACQ.
Chapter 17
*
538 A file which contains compressed waveform can not be loaded into the ACQ.
Please load it into Ref.
Chapter 17
*
539 Unable to load a logic waveform to Ref. Chapter 17
*
540 Unable to load a file containing logic waveforms. Chapter 17
*
541 Unable to load that file. Its extention is invalid. Chapter 17
*
542 Cannot save file more than 2GB.
Please either partially save the Zoom section, save in compressed format, or turn off
unnecessary wave display.
Chapter 17
*
543 There is already a file.
Do you overwrite?
Chapter 17
*
544 A file which contains multiple saved traces can not be loaded into Ref.
Please load it into Channels.
Chapter 17
*
545 Cannot save all the data with record length exceeding 1.25M in ASCII (CSV format).
Please either save in compressed format, partially save the Zoom section, or turn off
unnecessary wave display.
Chapter 17
*
546 The number of files of a root directory is maximum. Delete unnecessary files or save at a
subdirectory.
Chapter 17
*
547 The file save is unsupported in this setting. Chapter 17
*
5.2 Messages and Corrective Actions
* User’s Manual, IM DLM5058-02EN
To Next Page
Loading...
Need help?
General
