Common Operations
3-17
IM DLM5058-03EN
3
Setup Menu Operations (Same as soft key operations)
Selecting a Setup Menu Item
Click the setup menu item that you want to select. The operation after you click varies
depending on the setup menu type.
Click in this area to change the selected item.
Click to display a dialog box or keyboard.
Click to display a selection menu. Clicking the item
that you want to select will confirm your selection.
Each time you click, the setting being controlled changes.
Click the jog shuttle setting menu to enter a value.
Click to display a related setup menu.
Jog shuttle setting menu
Jog Shuttle Setting Menu
In the jog shuttle setting menu, you can set the value as follows:
• When there is a single
icon, clicking inside the frame displays a numeric keypad or
selection menu. When a numeric keypad appears, click the numeric keypad to input a
value. Click Enter to confirm the value. When a selection menu appears, click the item
you want to select.
• When there are two
icons, clicking the icon switches the setting being controlled.
Clicking the setting displays a numeric keypad or a selection menu.
Click a setting to set the value with the
numeric keypad or a selection menu.
Click in this area to change the setting being controlled.
• To reset a value you set to its default value, click the setting, and click Default in the
setup menu that appears. When the setup menu does not appear, press RESET.
Clearing a Setup Menu or Setup Screen
Move the pointer and click outside the setup menu or setup screen, or press ESC.
3.4 Using USB Keyboards and Mouse Devices
To Next Page
Loading...
