YOKOGAWA GC8000 - Notice and Safety Information; Manual Handling Guidelines; Safety and Modification Rules

3
TI 11B08A01-01E
u Notice
This Manual provides technical information for installing a GC8000 at site.
When installing or checking the installation of the GC8000, read the precautions carefully.
n Regarding This Manual
• ThisManualshouldbepassedontotheenduser.
• Read this manual carefully and fully understand how to operate this product before you start
operation.
• All rights reserved. No part of this manual may be reproduced in any form without
Yokogawa’s written permission.
• The contents of this manual are subject to change without prior notice.
• Great effort has been made to ensure that the descriptions in this Manual are correct.
However, if you notice any error or inconsistency, please inform Yokogawa Electric
Corporation.
n Regarding Protection, Safety, and Prohibition Against Unauthorized
Modication
• For the protection and safe use of the product and the system controlled by it, be sure to
follow the safety instructions described in this manual. Safety is not guaranteed if you do not
follow these instructions.
• The following safety symbol marks are used on the product concerned or in this Manual:
WARNING
A WARNING sign denotes a hazard. It calls attention to a procedure, practice, condition or the
like, which, if not correctly performed or adhered to, could result in injury or death of personnel.
CAUTION
A CAUTION sign denotes a hazard. It calls attention to a procedure, practice, condition or the
like, which, if not correctly performed or adhered to, could result in damage to or destruction of
part or all of the product.
IMPORTANT
Indicates that operating the hardware or software in this manner may damage it or lead to system
failure.
NOTE
Draws attention to information essential for understanding the operation and features.
TIP
Gives information that complements the present topic.
 Protectivegroundterminal:
In order to provide protection against electrical shock in case of a fault. This symbol indicates that
theterminalmustbeconnectedtogroundpriortooperationofequipment.
 Functiongroundterminal:
In order to provide protection against noise. This symbol indicates that the terminal must be
connectedtogroundpriortooperationofequipment.
Sep. 07, 2017-00