YOKOGAWA GC8000 User Manual

2
TI 11B08A01-01E
u Introduction
This manual describes the installation of the GC8000 Process Gas Chromatograph.
Please read the following documents before installing and using the GC8000 system.
n Documents Related to the GC8000 Process Gas Chromatograph
l User’s manuals
The product comes with the following user’s manuals.
(The last “E” in the document number is the language code.)
• User’smanualsthatdonotdependuponthespecicationsoftheproduct:
GC8000 Process Gas Chromatograph (IM 11B08A01-01E)
• User’smanualsthatareattacheddependingonspecificationsoftheproduct:
Process Gas Chromatograph GC8000 Installation Manual (TI 11B08A01-01E, this manual)
• User’smanualsforrelatedproducts:
PCAS PC Analyzer Server Software (IM 11B06B01-01E)
ASET Analyzer Server Engineering Terminal Software (IM 11B06C01-01E)
ASGW Analyzer Server Gateway Software (IM 11B06E01-01E)
ASIU Analyzer Server Interface Unit Software (IM 11B06F01-01E)
GCVT Virtual Tech Software (IM 11B08C02-01E)
ANABUS Ethernet System Redundancy Setting Manual (TI 11B03A03-14E)
l Operation Data
Operation data is supplied with the operation manuals in the delivered package and contains
thefollowingapplicationspecicinformationrequiredtousetheGC8000ProcessGas
Chromatograph.
• Process conditions and measurement range
• Instrumentspecicationsandoperatingconditions
• Standard sample for calibration
• Column system and column
• Miscellaneous data
Chromatogram, base line, repeatability, etc.
• Analyzerowdiagramandinstallation
• Parts composition table
• General connection diagram
• Sampling system diagram (when supplied by Yokogawa)
Sep. 07, 2017-00

YOKOGAWA GC8000 Specifications

General

Brand	YOKOGAWA
Model	GC8000
Category	Laboratory Equipment
Language	English