YOKOGAWA GC8000 User Manual

9
TI 11B08A01-01E
n General Precautions
WARNING
In order to analyze gases, process gas chromatographs use various kinds of process gases and
utility gases.
Since these gases are typically combustible, combustion-sustaining, toxic, odorous, resolvable,
polymerizing, or corrosive, refer to the “Safety Information” in our approval drawings and others
to ensure safety thoroughly before using them.
WARNING
• TheGC8000weighsabout100to220kg.Unpackitneartheinstallationsite.Usea
transportation machine to move it. Handle it carefully to prevent it from falling.
• Up to two protection system may be included, each of which weighs approximately 7 kg, are
installed on top of the GC8000. Therefore, the center of gravity is higher than the center of
the analyzer body.
CAUTION
Forliftingandcarryingtheequipment,usethosetwo(orthree)xturebracketswhicharexedto
thewooden(orothermaterials)cratefortheequipment.
CAUTION
• Since the GC8000 is a precision instrument, take care when handling it to avoid impact.
• TheGC8000isdesignedforuseunderspeciedenvironment(overvoltagecategory,
pollutiondegree,ambienttemperature,owrateandpressureofsampleandutilitygasand
specicationofelectricpower).Itisoutofwarrantyagainstoccuredresultincasewhen
exceed these specs.
• UsetheGC8000withintherangeofyourpurchasespecications.
Yokogawa assumes no responsibility for problems resulting from use by the customer
outsidethepurchasespecications.
 IftheGC8000needstobemodiedorrepaired,pleasecontactyournearestYokogawa
representative. Yokogawa assumes no responsibility for results where the customer or any
third party has attempted to modify or repair this product.
• For cleaning of analyzer, do not use any abrasives or organic solvent.
CAUTION
This instrument is a Class A product for EMC standard (Emission), and is designed for use in an
industrial environment. Please use this instrument in an industrial environment only.
ComplyingwithEMCStandardforATEX,IECEx,andNEPSI:
• EN61326-1 Class A (Emission)
• EN61326-1, EN61326-2-3 (Immunity)
• KoreaElectromagneticConformityStandard
Sep. 07, 2017-00

YOKOGAWA GC8000 Specifications

General

Brand	YOKOGAWA
Model	GC8000
Category	Laboratory Equipment
Language	English