YOKOGAWA GC8000 - Equipment Checking and Model Codes

2. Installation, Piping, and Wiring
55
TI 11B08A01-01E
CAUTION
Forliftingandcarryingtheequipment,usethosetwo(or
three)xturebracketswhicharexedtothewooden(orother
materials)cratefortheequipment.
GC8000usessomexturebracketsforcratingtosecurethe
equipmenttoacrateduringtransportaion.
Wall-mountedtype: Thexturebracketsforcratingare
meanttosecuretheequipmenttoacrateandtomounttheequipmentto
a wall as well. However, don’t use those screws applied to the brackets
tomounttheequipmenttoawall.Theyarenotdesignedforwall
mounting.
Self-standingtype: Thexturebracketsforcratingareexclusivelyforthepurposeof
shipping. Be sure to detach the brackets away from GC8000 after an
installationoftheequipmentiscompleted.Don’tusethebracketsto
mounttheequipmenttoawall.Theyarenotdesignedforwallmounting.
(4) Checking equipment
Checkthattheequipmenthasnotbeendamagedduringtransportation.ContactYokogawaifany
damage is found. Keep the packing such as crates.
l ModelandSufxCodes
CheckthatthemodelandsufxcodesonthedataplateontheleftsideoftheGC8000match
those on the order sheet. Refer to “1.6 Data Plate.”
Fixture brackets
Sep. 07, 2017-00