YOKOGAWA GC8000 User Manual

1. Overview
42
TI 11B08A01-01E
(6) FID/FPD combustion air
This air is used to burn hydrogen gas in an FID or FPD.
The air must satisfy the following conditions.
Purity: Measuring range from 0 to 50 ppm or more: moisture: 10 ppm or less; organic
components: 5 ppm or less
Measuring range from 0 to less than 50 ppm: moisture: 5 ppm or less; organic
components: 0.1 ppm or less
(7) Steam
Steamisrequiredtosteam-heatasample.Prepareasteamsourcethatcanapplythepressure
listed in “Operation Data.”
1.5 Conformance Standards
Safety Standard, EMC Standard and RoHS Standard are showned in the following list.
ExCertication MS code Safety Standard EMC standard RoHS standard
TIIS GC8000-T - - -
ATEX*1 GC8000-A EN 61010-1
EN 61010-2-030
GB 30439.1 (for NEPSI)
EN 61326-1 Class A, Table 2
EN 61326-2-3
Korea Electromagnetic
Conformity Standard
RCM Mark
EN 50581
IECEx*2 GC8000-E -
NEPSI*3 GC8000-P
FM GC8000-F
GC8000-G
FM 3810: 2005
(ANSI/ISA 61010-1-2004
(82.02.01),
ANSI/ISA-82.02.02-1996
(IEC 61010-2-031))
- -
CSA GC8000-C
GC8000-D
CSA C22.2 No. 61010-1-04 - -
*1: Analyzerbasesamplingunit(GCSMP)orbaseplacedunderGC8000-AisnotcoveredbytheEU-DoCnor
theECType-examinationCerticate.Theemptycompartment(base)placedbyYokogawatocreateaSelf-
standing GC8000-A, does not impair the compliance of the GC8000-A.
*2: ThedesignisbasedonthesafetyandEMCstandard,thoughthemarkofCEisnotindicated.
*3: ThedesignisbasedonthesafetyandEMCstandard,thoughthemarkofCE,KCandRCMarenot
indicated.
CAUTION
This instrument is a Class A product, and is designed for use in an industrial environment. Please
use this instrument in an industrial environment only.
Alistbelowshowstheapplicablestandardsforelectricalequipmentforexplosiveatmospheres.
Thislistdoesnotincludestandardsotherthanrelatedtoelectricalequipmentforexplosive
atmospheres.
Formoredetails,seeeachcerticate.PleasecontactyournearestYokogawarepresentative.
ExCertication MS code Standards for electrical equipment for explosive atmospheres
TIIS GC8000-T Constructionalrequirementsforelectricalequipmentforexplosive
atmospheres
Referenceguide;Typeexaminationguideforelectricalequipmentforexplosive
atmospheres (relating to technical standards conforming to international
standards) issued by the TIIS (Technical Institution of Industrial Safety), Japan.
(Issued in November, 1996.)
ATEX GC8000-A EN 60079-0:20012+A11, EN 60079-1:2014, EN 60079-2:2014
IECEx GC8000-E IEC 60079-0:2011, IEC 60079-1:2014, IEC 60079-2:2014
NEPSI GC8000-P GB 3936.1-2010, GB 3836.2-2010, GB 3836.5-2004
Sep. 07, 2017-00

YOKOGAWA GC8000 Specifications

General

Brand	YOKOGAWA
Model	GC8000
Category	Laboratory Equipment
Language	English