YOKOGAWA MT300 - D;A Output (D;A OUTPUT) (;DA Option)

4-5
IM MT300-02EN
External Signal I/O
1
2
3
4
5
6
App
Index
4.5 D/A Output (D/A OUTPUT) (/DA option)
CAUTION
Do not short the D/A output terminal or apply external voltage to it. If you do, the instrument
may malfunction.
French
ATTENTION
Ne pas court-circuiter la borne de sortie D/A et ne pas y appliquer de tension externe. Si vous
le faites, l’instrument risque de ne pas fonctionner correctement.
D/A Output Terminal (D/A OUTPUT)
This terminal converts pressure measurement results into voltage (D/A conversion) and outputs it.
Item Specifications
Source range 2 VDC range, 5 VDC range
Output update interval Dynamic mode off: Approx. 2 ms (normal measurement mode)
Approx. 0.25 ms (medium-speed/high-speed
measurement mode
*
)
Dynamic mode on
*
: Approx. 0.25 ms
Terminal BNC terminal
* Selectable on models with the /F1 option.
Note
For details on the D/A output, see section 4.2 in the user’s manual (IM MT300-01EN).