YOKOGAWA WT110 User Manual

IM 253401-01E
App2-9
App
Appendix 2.3 Commands
Communication Commands 2
Command Description Page
INTEGrate Group
:INTEGrate? Queries all settings related to integration. App. 2-19
:INTEGrate:MODE Sets/queries the integration mode. App. 2-19
:INTEGrate:RESet Resets the integration values. App. 2-19
:INTEGrate:STARt Starts integration. App. 2-19
:INTEGrate:STOP Stops integration. App. 2-19
:INTEGrate:TIMer Sets/queries the integration timer. App. 2-19
MATH Group (applies to WT110/WT130 with ROM version 2.01 or later)
:MATH? Queries all settings related to the computing function. App. 2-20
:MATH:ARIThmetic Sets/queries the computing equation of the four arithmetic operations. App. 2-20
:MATH:CFACtor Sets/queries the computing equation of the crest factor. App. 2-20
:MATH:TYPE Sets/queries the computing equation. App. 2-20
MEASure Group
:MEASure? Queries all settings related to measurement/computation data. App. 2-22
:MEASure:HARMonics? Queries all settings related to harmonic analysis data. App. 2-22
:MEASure:HARMonics:ITEM? Queries all settings related to the output items of harmonic analysis data. App. 2-22
:MEASure:HARMonics:ITEM:PRESet Sets the ON/OFF pattern for all communication outputs of the harmonic
analysis function. App. 2-22
:MEASure:HARMonics:ITEM:{SYNChronize|<harmonic analysis function>}
Sets/queries the communication output item of harmonic analysis ON/OFF. App. 2-22
:MEASure:HARMonics:VALue? Queries harmonic analysis data set by commands other than
“ MEASure:HARMonics:ITEM ”. App. 2-22
:MEASure:NORMal? Queries all settings related to normal measured/computed data. App. 2-22
:MEASure[:NORMal]:ITEM? Queries all settings related to the output items of normal measured/computed data. App. 2-23
:MEASure[:NORMal]:ITEM:PRESet Sets the ON/OFF pattern for all communication outputs of the normal
measurement function. App. 2-23
:MEASure[:NORMal]:ITEM:{TIME|MATH} Sets/queries the ON/OFF state of the communication output of
{integration time|MATH} . App. 2-23
:MEASure[:NORMal]:ITEM:<normal measurement function>?
Queries communication output settings of the normal measurement function. App. 2-23
:MEASure[:NORMal]:ITEM:<normal measurement function>[:ALL]
Sets the communication output items concerning all elements or S ON/
OFF at once. App. 2-23
:MEASure[:NORMal]:ITEM:<normal measurement function>:ELEMent<x>
Sets/queries the communication output items concerning each element
ON/OFF. App. 2-23
:MEASure[:NORMal]:ITEM:<normal measurement function>:SIGMA
Sets/queries the communication output items concerning S ON/OFF. App. 2-23
:MEASure[:NORMal]:VALue? Queries normal measured/computed data set by commands other than
“ MEASure[:NORMal]:ITEM ” App. 2-23
RECall Group
:RECall? Queries all settings related to recalling data. App. 2-27
:RECall:INTerval Sets/queries the recalling interval. App. 2-27
:RECall:PANel Retrieves the set-up parameters file. App. 2-27
:RECall[:STATe] Sets/queries recalling ON/OFF. App. 2-27

YOKOGAWA WT110 Specifications

General

Brand	YOKOGAWA
Model	WT110
Category	Measuring Instruments
Language	English