YOKOGAWA WT110 User Manual

IM 253401-01E
1-6
SHIFT
RESET
INTEG SET
( Display C )
2.
(Setting integration mod)
(Setting integration timer)
(Setting integration preset time)
1.
• Integration Setting
SHIFT
START
HARMONICS
(Display C)
2.
1.
• Turning the Harmonic Analysis Function ON/OFF
(Setting the element)
(Setting PLL source)
(Setting computation methood
of harmonic distortion)
SHIFT
STOP
MEMORY
( Display C )
2.
(Storing measurement data)
(Recalling measurement data)
(Storing set-up parameters)
(Recalling set-up parameters)
1.
• Storing/Recalling to/from Internal Memory
SHIFT
SETUP
OUTPUT
( Display C )
2.
(Setting comm./plotter/printer output)
(Execute plotter/printer output)
(Setting D/A output)
(Comparator setting:relay output setting)
1.
• Setting Output
SHIFT
LOCAL
INTERFACE
( Display C )
2.
(Setting addressable mode A)
(Setting addressable mode B)
(Setting talk-only mode)
(Print mode setting:setting plotter/printer output)
1.
• Setting Communication Interface (GP-IB)
(Setting communication commands according to IEEE 488.2-1987)
SHIFT
LOCAL
INTERFACE
( Display C )
2.
(Setting normal mode)
(Setting talk-only mode)
(Print mode setting:setting plotter/printer output)
1.
• Setting Communication Interface (RS-232-C)
(Setting communication commands according to IEEE 488.2-1987)
1.3 Digital Numbers/Characters, and Initial Menus

YOKOGAWA WT110 Specifications

General

Brand	YOKOGAWA
Model	WT110
Category	Measuring Instruments
Language	English