EasyManuals Logo

YOKOGAWA WT110 User Manual

YOKOGAWA WT110
204 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #180 background imageLoading...
Page #180 background image
IM 253401-01E
App2-23
App
Appendix 2.3 Commands
Communication Commands 2
MEASure[:NORMal]:ITEM?
Function Queries all settings related to the communication
output items of normal measured/computed data.
Syntax
MEASure[:NORMal]:ITEM?
Example
MEASURE:NORMAL:ITEM?
(Results are the same
as for MEASure:NORMal? )
MEASure[:NORMal]:ITEM:PRESet
Function Sets the ON/OFF pattern for all communication
outputs of the normal measurement function.
Syntax
MEASure[:NORMal]:ITEM:PRESet {NORMal|
INTEGrate|CLEar}
Example
MEASURE:NORMAL:ITEM:PRESET NORMAL
Description The following three patterns can be selected. The
same setting applies to the current all elements or .
NORMal : V/A/W
ON, others
OFF
INTEGrate : W/WH/AH/TIME
ON, others
OFF
CLEar :
all items
OFF
MEASure[:NORMal]:ITEM:{TIME|MATH}
Function Sets the communication output of
{integration
elasped time|MATH}
ON/OFF, queries about the
current setting.
Syntax
MEASure[:NORMal]:ITEM:{TIME|MATH} {<Boolean>}
MEASure[:NORMal]:ITEM:{TIME|MATH}?
Example
MEASURE:NORMAL:ITEM:TIME OFF
MEASURE:NORMAL:ITEM:TIME?
:MEASURE:NORMAL:
ITEM:TIME 0
MEASure[:NORMal]:ITEM:<normal
measurement function>?
Function Queries communication output settings of the normal
measurement function.
Syntax
MEASure[:NORMal]:ITEM:<normal measurement
function>?
<normal measurement function>={V|A|W|VA|VAR|
PF|DEGRee|VHZ|AHZ|WH|WHP|WHM|AH|AHP|AHM|VPK|APK}
Example
MEASURE:NORMAL:ITEM:V?
:MEASURE:NORMAL:ITEM:
V:ELEMENT1 1;ELEMENT2 1;ELEMENT3 1;SIGMA 1
Description For the meanings of the symbols of functions, see
Note on page App2-11.
MEASure[:NORMal]:ITEM:<normal
measurement function>[:ALL]
Function Sets the communication output concerning all
elements or ON/OFF at once.
Syntax
MEASure[:NORMal]:ITEM:<normal measurement
function>[:ALL] {<Boolean>}
Example
MEASURE:NORMAL:ITEM:V:ALL ON
MEASure[:NORMal]:ITEM:<normal
measurement function>:ELEMent<x>
Function Sets the communication output concerning each
element ON/OFF, queries the current setting.
Syntax
MEASure[:NORMal]:ITEM:<normal measurement
function>:ELEMent<x> {<Boolean>}
MEASure[:NORMal]:ITEM:<normal measurement
function>:ELEMent<x>?
Example
MEASURE:NORMAL:ITEM:V:ELEMENT1 ON
MEASURE:NORMAL:ITEM:V:ELEMENT?
:MEASURE:
NORMAL:ITEM:V:ELEMENT1 1
MEASure[:NORMal]:ITEM:<normal
measurement function>:SIGMa
Function Sets the communication output concerning ON/
OFF, queries the current setting.
Syntax
MEASure[:NORMal]:ITEM:<normal measurement
function>:SIGMa {<Boolean>}
MEASure[:NORMal]:ITEM:<normal measurement
function>:SIGMa?
Example
MEASURE:NORMAL:ITEM:V:SIGMA ON
MEASURE:NORMAL:ITEM:V:SIGMA?
: MEASURE:
NORMAL:ITEM:V:SIGMA 1
MEASure[:NORMal]:VALue?
Function Queries normal measured/computed data set by
commands other than “
MEASure[:NORMal]:ITEM
”.
Syntax
MEASure[:NORMal]:VALue?
Example
MEASURE:NORMAL:VALUE?
10.04E+00,10.02E+00, 10.03E+00,49.41E+00,...
Description • The renewal of normal measured/computed data
output here occures when bit0 (UPD) of the
condition register (refer to page App2-38) changes
from high to low. For more details, refer to 2.2.6.
• For the output format of normal measured/computed
data, refer to page App2-24.
• When the harmonic analysis function is ON,
harmonic analysis data will be returned.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the YOKOGAWA WT110 and is the answer not in the manual?

YOKOGAWA WT110 Specifications

General IconGeneral
BrandYOKOGAWA
ModelWT110
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals