JOHNSON CONTROLS
92
FORM 155.32-ICOM1.EN.GB
ISSUE DATE: 10/13/2017
SECTION 6 – OPERATION
When you press the OPER. button while the chiller-
heater is stopped, or STOP while the chiller-heater is
operating, a confirmation message appears. Press YES
or NO depending on whether you want to continue or
cancel your selection.
• Screen Name Buttons - Each screen includes
buttons for changing screens. The button that is
lit indicates which screen you are on. They are lo-
cated along the bottom of the screen.
CHANGE NUMERIC VALUES
Many numeric values, such as the set point and the
ranges on the Trend screen, can be changed. Here’s
how:
1. Touch the number to be changed. A numeric key-
pad appears.
2. Enter the new value on the keypad.
3. Press the ENT button to set it.
To Next Page
Loading...
