JOHNSON CONTROLS
99
SECTION 6 – OPERATION
FORM 155.32-ICOM1.EN.GB
ISSUE DATE: 10/13/2017
6
BURNER PARTS REPLACEMENT/ BURNER COMBUSTION CHECK
SCREEN
LD21554
FIGURE 35 - BURNER PARTS REPLACEMENT/ BURNER COMBUSTION CHECK SCREEN
The Burner Parts Replacement section of the
screen displays the maintenance interval and cur-
rent operation hours since the last maintenance
of the control panel. It is important to prevent
malfunction of the burner and its related devices
from deterioration. When the required main-
tenance interval has passed, the maintenance
alarm is activated with the warning "Burner parts
should be replaced." When the warning appears,
contact your local Johnson Controls service cen-
ter.
The Burner Combustion Check section of the screen in-
dicates the maintenance interval and current operation
hours since the last maintenance of the burner combus-
tion. It is important to keep the combustion properly
adjusted to prevent abnormal combustion. Periodic
check and adjustment of the combustion is required.
When the required maintenance interval has passed,
the maintenance alarm is activated with the warning
"Burner combustion should be checked." When the
warning appears, contact your local Johnson Controls
service center.
To Next Page
Loading...
Need help?
General
