Zanotti Zero Series - Plant Components

INSTALLATION MANUAL
Refrigeration unit
Series Zero Direct-Drive
Z200 | Z250 | Z350 | Z380
Z380 Multi
10
rev.01
1.8 Plant components
The refrigeration unit consists of the following parts (Figure 3):
1. Condenser unit, installed outside the isothermic crate.
2. Evaporative unit installed inside the isothermic crate.
3. Electronic control and command power unit (HMI) , located inside the vehicle cab (in-cab
controller).
Figure 3 - Refrigeration unit Zero Direct-Drive
1 Condenser unit 3 In-cab controller
2 Evaporator