USB/Ethernet Communication
60
9. If required, in the Netmask field, enter the network mask address
10.If required, in the DNS address fields, enter a Domain Name System (DNS) addresses.
11.Touch CONNECT.
12.Touch .
Establishing Ethernet Connection
1. Swipe down with two fingers from the status bar to open the quick access panel and then touch .
2. Touch Network & Internet.
3. Touch Ethernet.
4. Insert the device into a slot.
5. Slide the Ethernet switch to the ON position.
The icon appears in the Status bar.
6. Touch Eth0 to view Ethernet connection details.
To Next Page
Loading...