Undecoded Scanner Emulation Interface 10 - 9
Transmission Timeout
The undecoded scanner emulation host transmits bar code data to the attached decoder and waits for the attached
decoder to assert the Decode signal, indicating successful transmission. If, after a specified amount of time, the
Decode signal is not asserted (indicating the attached decoder did not receive the bar code data), the scanner
issues Transmit Error beeps.
Scan the appropriate bar code below to select the desired transmission timeout.
*3 Second Transmission Timeout
4 Second Transmission Timeout
5 Second Transmission Timeout
10 Second Transmission Timeout
30 Second Transmission Timeout
To Next Page
Loading...
