EasyManuals Logo

Zebra LS2208 Reference Guide

Zebra LS2208
334 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #207 background imageLoading...
Page #207 background image
Symbologies 12 - 49
Set Lengths for MSI
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Set lengths for MSI for any length, one or two discrete lengths, or lengths within a specific
range.
One Discrete Length - Select this option to decode only MSI symbols containing a selected length. Select the
length using the numeric bar codes in Appendix D, Numeric Bar Codes. For example, to decode only MSI symbols
with 14 characters, scan MSI - One Discrete Length, then scan 1 followed by 4. To correct an error or change a
selection, scan Cancel on page D-3.
MSI - One Discrete Length
Two Discrete Lengths - Select this option to decode only MSI symbols containing either of two selected
lengths. Select the lengths using the numeric bar codes in Appendix D, Numeric Bar Codes. For example, to
decode only those MSI symbols containing either 2 or 14 characters, select MSI - Two Discrete Lengths, then
scan 0, 2, 1, and then 4. To correct an error or change a selection, scan Cancel on page D-3.
MSI - Two Discrete Lengths
Length Within Range - Select this option to decode an MSI symbol with a specific length range. Select the
length range using the numeric bar codes in Appendix D, Numeric Bar Codes. For example, to decode MSI
symbols containing between 4 and 12 characters, first scan MSI - Length Within Range. Then scan 0, 4, 1, and
2 (single digit numbers must always be preceded by a leading zero). To correct an error or change a selection,
scan Cancel on page D-3.
MSI - Length Within Range
Any Length - Scan this option to decode MSI symbols containing any number of characters within the scanner’s
capability.
MSI - Any Length
NOTE Due to the construction of the MSI symbology, it is possible for a scan line covering only a portion of the
code to transmit as a complete scan, yielding less data than is encoded in the bar code. To prevent this,
Zebra recommends selecting specific lengths (MSI - One Discrete Length, Two Discrete Lengths) for MSI
applications.

Table of Contents

Other manuals for Zebra LS2208

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zebra LS2208 and is the answer not in the manual?

Zebra LS2208 Specifications

General IconGeneral
Scan TechnologyLaser
ConnectivityWired
Scan PatternSingle line
Drop SpecificationWithstands multiple 5 ft./1.5 m drops to concrete
Scanner TypeHandheld
Scan Rate100 scans per second
Humidity5% to 95% (non-condensing)
Interface OptionsUSB, RS-232, Keyboard Wedge
Decode Capability1D barcodes
Dimensions15.2 cm H x 6.3 cm W x 8.4 cm D
Weight146 g
Operating Temperature0°C to 50°C
Resolution5 mil
Supported BarcodesUPC/EAN, Code 39, Code 128, GS1 DataBar
Storage Temperature-40°C to 70°C

Related product manuals