Zebra LS2208 Reference Guide

13 - 2 LS2208 Product Reference Guide
Scanning Sequence Examples
In most cases you need only scan one bar code to set a specific parameter value.
Parameters, such as Prefix Value, require scanning several bar codes in sequence. See each individual
parameter for descriptions of this procedure.
Errors While Scanning
Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.
Miscellaneous Default Parameters
Table 13-1 lists the defaults for miscellaneous scanner options parameters. To change an option, scan the
appropriate bar code(s) in the Miscellaneous Scanner Parameters section beginning on page 13-3.
NOTE See Appendix A, Standard Default Parameters for all user preferences, hosts, symbologies, and
miscellaneous default parameters.
Table 13-1 Miscellaneous Scanner Options Default Table
Parameter Default Page Number
Transmit Code ID Character None 13-3
Prefix Value 7013 <CR><LF> 13-4
Suffix Value 7013 <CR><LF> 13-4
Scan Data Transmission Format Data as is 13-4
FN1 Substitution Values Set 13-6
Transmit “No Read” Message Disable 13-6
Synapse Interface Standard 13-7

Zebra LS2208 Specifications

General

Scan Technology	Laser
Connectivity	Wired
Scan Pattern	Single line
Drop Specification	Withstands multiple 5 ft./1.5 m drops to concrete
Scanner Type	Handheld
Scan Rate	100 scans per second
Humidity	5% to 95% (non-condensing)
Interface Options	USB, RS-232, Keyboard Wedge
Decode Capability	1D barcodes
Dimensions	15.2 cm H x 6.3 cm W x 8.4 cm D
Weight	146 g
Operating Temperature	0°C to 50°C
Resolution	5 mil
Supported Barcodes	UPC/EAN, Code 39, Code 128, GS1 DataBar
Storage Temperature	-40°C to 70°C