Zebra LS2208

Appendix A Standard Default Parameters
Table A-1 Standard Default Parameters Table
Parameter Default Page Number
User Preferences
Set Default Parameter All Defaults 4-3
Beeper Tone Medium 4-4
Beeper Volume High 4-5
Power Mode Continuous On 4-6
Laser On Time 3.0 Sec 4-7
Beep After Good Decode Enable 4-8
Timeout Between Decodes
Time-out Between Same Symbol 0.6 sec
4-9
Time-out Between Different Symbols 0.2 sec 4-9
Keyboard Wedge Host Parameters
Keyboard Wedge Host Type
IBM PC/AT& IBM PC Compatibles
1
5-4
Country Types (Country Codes) North American 5-5
Ignore Unknown Characters Transmit 5-7
Keystroke Delay No Delay 5-8
Intra-Keystroke Delay Disable 5-9
Alternate Numeric Keypad Emulation Disable 5-9
Caps Lock On Disable 5-10
1
User selection is required to configure this interface and this is the most common selection.