Zebra LS2208 Reference Guide

A - 2 LS2208 Product Reference Guide
Caps Lock Override Disable 5-10
Convert Wedge Data No Convert 5-11
Function Key Mapping Disable 5-12
FN1 Substitution Disable 5-13
Send and Make Break Send 5-13
RS-232 Host Parameters
RS-232 Host Types
Standard
1
6-6
Baud Rate 9600 6-8
Parity Type None 6-10
Stop Bit Select 1 Stop Bit 6-12
Data Bits 8-Bit 6-12
Check Receive Errors Enable 6-13
Hardware Handshaking None 6-14
Software Handshaking None 6-16
Host Serial Response Time-out 2 Sec 6-18
RTS Line State Low RTS 6-19
Beep on <BEL> Disable 6-19
Intercharacter Delay 0 msec 6-20
Nixdorf Beep/LED Options Normal Operation 6-21
Ignore Unknown Characters Send Bar Code 6-21
USB Host Parameters
USB Device Type HID Keyboard Emulation 7-4
USB Country Keyboard Types (Country Codes) North American 7-6
USB Keystroke Delay No Delay 7-9
USB CAPS Lock Override Disable 7-10
USB Ignore Unknown Characters Enable 7-11
Emulate Keypad Disable 7-12
USB Keyboard FN1 Substitution Disable 7-12
Table A-1 Standard Default Parameters Table (Continued)
Parameter Default Page Number
1
User selection is required to configure this interface and this is the most common selection.

Zebra LS2208 Specifications

General

Scan Technology	Laser
Connectivity	Wired
Scan Pattern	Single line
Drop Specification	Withstands multiple 5 ft./1.5 m drops to concrete
Scanner Type	Handheld
Scan Rate	100 scans per second
Humidity	5% to 95% (non-condensing)
Interface Options	USB, RS-232, Keyboard Wedge
Decode Capability	1D barcodes
Dimensions	15.2 cm H x 6.3 cm W x 8.4 cm D
Weight	146 g
Operating Temperature	0°C to 50°C
Resolution	5 mil
Supported Barcodes	UPC/EAN, Code 39, Code 128, GS1 DataBar
Storage Temperature	-40°C to 70°C