Zebra LS2208 Reference Guide

Standard Default Parameters A - 3
Function Key Mapping Disable 7-13
Simulated Caps Lock Disable 7-13
Convert Case No Case Conversion 7-14
IBM 468X/469X Host Parameters
Port Address None Selected 8-4
Convert Unknown to Code 39 Disable 8-5
Wand Emulation Host Parameters
Wand Emulation Host Types Symbol OmniLink Interface
Controller
1
9-4
Leading Margin 80 msec 9-5
Polarity Bar High/Margin Low 9-6
Ignore Unknown Characters Ignore 9-6
Convert All Bar Codes to Code 39 Disable 9-7
Convert Code 39 to Full ASCII Disable 9-7
Undecoded Scanner Emulation
Beep Style Beep on Successful Transmit 10-5
Parameter Pass-Through Parameter Process and Pass
Through
10-6
Convert Newer Code Types Convert Newer Code Types 10-7
Module Width 20 µs 10-7
Convert All Bar Codes to Code 39 Do Not Convert to Code 39 10-8
Code 39 Full ASCII Conversion Disable 10-8
Transmission Timeout 3 seconds 10-9
Ignore Unknown Characters Ignore Unknown Characters 10-10
Leading Margin 2 ms 10-11
Check for Decode LED Check for Decode LED 10-12
123Scan2 Configuration Tool
123Scan
2
Configuration None
1
11-1
Table A-1 Standard Default Parameters Table (Continued)
Parameter Default Page Number
1
User selection is required to configure this interface and this is the most common selection.

Zebra LS2208 Specifications

General

Scan Technology	Laser
Connectivity	Wired
Scan Pattern	Single line
Drop Specification	Withstands multiple 5 ft./1.5 m drops to concrete
Scanner Type	Handheld
Scan Rate	100 scans per second
Humidity	5% to 95% (non-condensing)
Interface Options	USB, RS-232, Keyboard Wedge
Decode Capability	1D barcodes
Dimensions	15.2 cm H x 6.3 cm W x 8.4 cm D
Weight	146 g
Operating Temperature	0°C to 50°C
Resolution	5 mil
Supported Barcodes	UPC/EAN, Code 39, Code 128, GS1 DataBar
Storage Temperature	-40°C to 70°C