155
Troubleshooting
Miscellaneous Issues
10/7/16 ZT410 RFID Printer for Silverline Media User Guide P1089083-001
The printer locks up
while running the
Power-On Self Test.
Main logic board failure. Call a service technician.
The printer is not
acknowledging a USB
device or is not
reading the files on a
USB device that is
plugged into the USB
host port.
The printer currently supports
USB drives only up to 1 TB in
size.
Use a USB drive that is 1 TB or smaller.
The USB drive may require its
own external power.
If your USB drive requires external power, make
sure that it is plugged into a working power
supply.
Table 20 • Miscellaneous Printer Problems (Continued)
Problem Possible Cause Recommended Solution
To Next Page
Loading...