Printer Setup and Operation
Install the Printer Driver and Connect the Printer to the Computer—USB
34
P1089083-001 ZT410 RFID Printer for Silverline Media User Guide 10/7/16
1. Click Next.
The System Prepare Wizard prompts you to connect the printer to the USB port on your
computer.
2. Click Finish.
The Zebra Setup Utilities screen displays.
Connecting the printer to a USB port on your computer
Complete the steps in this section only after the System Prepare Wizard prompts you to do so
or after you have opened the Zebra Setup Utilities program. If necessary, complete the steps in
Install Zebra Setup Utilities on page 24 before continuing.
Figure 8 • Zebra Setup Utilities Screen
To Next Page
Loading...