41
Printer Setup and Operation
Install the Printer Driver and Connect the Printer to the Computer—Serial or Parallel
10/7/16 ZT410 RFID Printer for Silverline Media User Guide P1089083-001
6. Click Install Printer.
You are prompted to select a printer type.
7. Select your printer model and resolution.
The model and resolution are on a part number sticker on the printer, usually located
below the media hanger. The information will be in the following format:
Part Number: XXXXXxY – xxxxxxxx
where
XXXXX = the printer model
Y = the printer resolution (2 = 203 dpi, 3 = 300 dpi, 6 = 600 dpi)
For example, in the part number ZT410x3 – xxxxxxxx
ZT410 indicates that the printer is a ZT410 model
3 indicates that the printhead resolution is 300 dpi
8. Click Next.
You are prompted for a printer name, the port to which the printer will be connected, and
the language for the program.
9. Change the printer name (if desired), and select the appropriate port and language.
To Next Page
Loading...