Printer Setup and Operation
Adjust and Configure the Printer for Silverline Media
60
P1089083-001 ZT410 RFID Printer for Silverline Media User Guide 10/7/16
4. On the printer’s control panel, press the LEFT SELECT button to go to the Home menu.
5. Press OK to enter the Settings menu.
6. Use the arrow buttons to scroll to and adjust the following parameters in the Settings
menu. For this application, Zebra recommends that you use the following settings:
• DARKNESS = 25
• LABEL LENGTH MAX = 5
• PRINT SPEED = 2 ips (can be set through the control panel or through the
^PR ZPL
command)
• SLEW = 2 ips (must be set through the
^PR ZPL command)
• BACKFEED = 2 ips (must be set through the ^PR ZPL command)
Table 3 • Toggle Pressure Settings
Tag Inside Dial Setting Outside Dial Setting
Micro 3 2
Classic 3 3
Slim 3 3
Blade 3 2
HOME MENU
XXXXXXX
XXXXXXX
SETTINGS
To Next Page
Loading...