USING THE REMOTE CONTROL (CONTINUED)
m REW
(Rewind)
With VCR in
$TOP
mode: press to rapidly rewind a tape
to its beginning.
During VCR playback: press to quickly review picture
playback in the reverse direction.
mRECORD
Press and hold down the
RECORD
button until the
"Recording" indicator on the VCR illuminates to begin
recording.
IDsToP
Press to discontinue recording
or
playback
of
a VCR
tape. Press and hold
to
eject a tape.
mENTER
.
Press after a channel number is entered with the
Numbered Buttons to change channels instantly.
Used
to display channel number, time and the mode that the
VCR
is
operating in.
m Numbered Buttons
Used
to select channels and program the VCR timer.
When information is entered without use
of
the
ENTER
button, the VCR will automatically respond in about 2
seconds.
NOTE:
If you are entering 2
or
3 digit information, press
the numbered buttons within two seconds
of
each other.
III ADJUST
Used
to
adjust and/or select the on-screen menu option
chosen with the SELECT button.
Use
ADJUST
to
correct the tracking during the playback
of
a recorded
tape.
msELECT
Used
to
sequence through the options displayed by an
on-screen menu
of
the VCR. Press during Automatic
Timer Recording
and
the Clock setting procedure
to
sequence
to
the next step.
IEIM.ENU
Press to display the on-screen menus used by the VCR.
8-6
To Next Page
Loading...
